Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board

From: Bernhard Nortmann
Date: Mon May 30 2016 - 16:27:04 EST


Am 30.05.2016 um 21:43 schrieb Maxime Ripard:
Hi,

On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@xxxxxxxxx wrote:
From: luoyi <luoyi.ly@xxxxxxxxx>

Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .
This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi.
What is the difference between the M1+ and the M1?

The M1+ is an updated version of the original Banana Pi. If you're interested
in the details, have a look at http://linux-sunxi.org/Banana_Pi#Variants .
"BPi-M1+" is SinoVoip's counterpart of LeMaker's "Banana Pro", for which a .dts
already exists. Judging from .fex files, only a single pin assignment seems to
differ between the two (audio_pa_ctrl, PH26 vs. PH15).

Regards, B. Nortmann