Re: [PATCH V9 05/11] ACPI/PCI: Add generic MCFG table handling

From: Bjorn Helgaas
Date: Fri Jun 10 2016 - 19:25:55 EST

Next message: Masami Hiramatsu: "Re: [PATCH perf/core v10 07/23] perf probe: Add --cache option to cache the probe definitions"
Previous message: Wim Osterholt: "disfunctional floppy driver in kernels 4.5, 4.6 and 4.7"
In reply to: Tomasz Nowicki: "[PATCH V9 05/11] ACPI/PCI: Add generic MCFG table handling"
Next in thread: Tomasz Nowicki: "[PATCH V9 07/11] PCI: Factor DT specific pci_bus_find_domain_nr() code out"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Jun 10, 2016 at 09:55:13PM +0200, Tomasz Nowicki wrote:
> According to PCI firmware specifications, on systems booting with ACPI,
> PCI configuration for a host bridge must be set-up through the MCFG table
> regions for non-hotpluggable bridges and _CBA method for hotpluggable ones.
>
> Current MCFG table handling code, as implemented for x86, cannot be
> easily generalized owing to x86 specific quirks handling and related
> code, which makes it hard to reuse on other architectures.
>
> In order to implement MCFG PCI configuration handling for new platforms
> booting with ACPI (eg ARM64) this patch re-implements MCFG handling from
> scratch in a streamlined fashion and provides (through a generic
> interface available to all arches):
>
> - Simplified MCFG table parsing (executed through the pci_mmcfg_late_init()
> hook as in current x86)
> - MCFG regions look-up interface through domain:bus_start:bus_end tuple
>
> The new MCFG regions handling interface is added to generic ACPI code
> so that existing architectures (eg x86) can be moved over to it and
> architectures relying on MCFG for ACPI PCI config space can rely on it
> without having to resort to arch specific implementations.
>
> Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
> Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx>
> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> ---
> drivers/acpi/Kconfig | 3 ++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/pci_mcfg.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/pci-acpi.h | 2 ++
> include/linux/pci.h | 2 +-
> 5 files changed, 99 insertions(+), 1 deletion(-)
> create mode 100644 drivers/acpi/pci_mcfg.c
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index b7e2e77..f98c328 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -217,6 +217,9 @@ config ACPI_PROCESSOR_IDLE
> bool
> select CPU_IDLE
>
> +config ACPI_MCFG
> + bool
> +
> config ACPI_CPPC_LIB
> bool
> depends on ACPI_PROCESSOR
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 251ce85..632e81f 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
> acpi-y += ec.o
> acpi-$(CONFIG_ACPI_DOCK) += dock.o
> acpi-y += pci_root.o pci_link.o pci_irq.o
> +obj-$(CONFIG_ACPI_MCFG) += pci_mcfg.o
> acpi-y += acpi_lpss.o acpi_apd.o
> acpi-y += acpi_platform.o
> acpi-y += acpi_pnp.o
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> new file mode 100644
> index 0000000..d3c3e85
> --- /dev/null
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -0,0 +1,92 @@
> +/*
> + * Copyright (C) 2016 Broadcom
> + * Author: Jayachandran C <jchandra@xxxxxxxxxxxx>
> + * Copyright (C) 2016 Semihalf
> + * Author: Tomasz Nowicki <tn@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2, as
> + * published by the Free Software Foundation (the "GPL").
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License version 2 (GPLv2) for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * version 2 (GPLv2) along with this source code.
> + */
> +
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/pci-acpi.h>
> +
> +/* Structure to hold entries from the MCFG table */
> +struct mcfg_entry {
> + struct list_head list;
> + phys_addr_t addr;
> + u16 segment;
> + u8 bus_start;
> + u8 bus_end;
> +};
> +
> +/* List to save mcfg entries */
> +static LIST_HEAD(pci_mcfg_list);
> +
> +phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
> +{
> + struct mcfg_entry *e;
> +
> + /*
> + * We expect exact match, unless MCFG entry end bus covers more than
> + * specified by caller.
> + */
> + list_for_each_entry(e, &pci_mcfg_list, list) {
> + if (e->segment == seg && e->bus_start == bus_res->start &&
> + e->bus_end >= bus_res->end)
> + return e->addr;

I think this is more strict than necessary. Here's a common situation
on x86:

MCFG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])

We would fail on PCI1 because the start doesn't match. But what you
have is fine for now, and we can loosen this up later if necessary.

> + }
> +
> + return 0;
> +}
> +
> +static __init int pci_mcfg_parse(struct acpi_table_header *header)
> +{
> + struct acpi_table_mcfg *mcfg;
> + struct acpi_mcfg_allocation *mptr;
> + struct mcfg_entry *e, *arr;
> + int i, n;
> +
> + if (header->length < sizeof(struct acpi_table_mcfg))
> + return -EINVAL;
> +
> + n = (header->length - sizeof(struct acpi_table_mcfg)) /
> + sizeof(struct acpi_mcfg_allocation);
> + mcfg = (struct acpi_table_mcfg *)header;
> + mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
> +
> + arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
> + if (!arr)
> + return -ENOMEM;
> +
> + for (i = 0, e = arr; i < n; i++, mptr++, e++) {
> + e->segment = mptr->pci_segment;
> + e->addr = mptr->address;
> + e->bus_start = mptr->start_bus_number;
> + e->bus_end = mptr->end_bus_number;
> + list_add(&e->list, &pci_mcfg_list);
> + }
> +
> + pr_info("MCFG table detected, %d entries\n", n);
> + return 0;
> +}
> +
> +/* Interface called by ACPI - parse and save MCFG table */
> +void __init pci_mmcfg_late_init(void)
> +{
> + int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
> + if (err)
> + pr_err("Failed to parse MCFG (%d)\n", err);
> +}
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 89ab057..7d63a66 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
> }
> extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>
> +extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
> +
> static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
> {
> struct pci_bus *pbus = pdev->bus;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 12349de..ce03d65 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1723,7 +1723,7 @@ void pcibios_free_irq(struct pci_dev *dev);
> extern struct dev_pm_ops pcibios_pm_ops;
> #endif
>
> -#ifdef CONFIG_PCI_MMCONFIG
> +#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
> void __init pci_mmcfg_early_init(void);
> void __init pci_mmcfg_late_init(void);
> #else
> --
> 1.9.1
>

Next message: Masami Hiramatsu: "Re: [PATCH perf/core v10 07/23] perf probe: Add --cache option to cache the probe definitions"
Previous message: Wim Osterholt: "disfunctional floppy driver in kernels 4.5, 4.6 and 4.7"
In reply to: Tomasz Nowicki: "[PATCH V9 05/11] ACPI/PCI: Add generic MCFG table handling"
Next in thread: Tomasz Nowicki: "[PATCH V9 07/11] PCI: Factor DT specific pci_bus_find_domain_nr() code out"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]