Re: [PATCH net-next] net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)
From: Netanel Belgazal
Date: Mon Jun 20 2016 - 11:33:56 EST
On 06/18/2016 12:11 AM, Francois Romieu wrote:
> Netanel Belgazal <netanel@xxxxxxxxxxxxxxxxx> :
> [...]
>
> More stuff below.
>
>> diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
>> new file mode 100644
>> index 0000000..357e10f
>> --- /dev/null
>> +++ b/drivers/net/ethernet/amazon/ena/ena_com.c
> [...]
>> +static int ena_get_dev_stats(struct ena_com_dev *ena_dev,
>> + struct ena_admin_aq_get_stats_cmd *get_cmd,
>> + struct ena_admin_acq_get_stats_resp *get_resp,
> At first sight it should be possible avoid one pointer argument with:
>
> struct ena_something {
> struct ena_admin_aq_get_stats_cmd cmd;
> struct ena_admin_acq_get_stats_resp resp;
>
> };
Ack
>
> [...]
>> +int ena_com_get_dev_extended_stats(struct ena_com_dev *ena_dev, char *buff,
>> + u32 len)
> Where is it used ?
It is currently unused. I'll remove it from this patch and add it in a separate once we'll support it.
>
>> +{
>> + int ret = 0;
>> + struct ena_admin_aq_get_stats_cmd get_cmd;
>> + struct ena_admin_acq_get_stats_resp get_resp;
>> + void *virt_addr;
> int rc = -ENOMEM;
> char *str;
>
>> + dma_addr_t phys_addr;
>> +
>> + virt_addr = dma_alloc_coherent(ena_dev->dmadev,
>> + len,
>> + &phys_addr,
>> + GFP_KERNEL | __GFP_ZERO);
>> + if (!virt_addr) {
>> + ret = -ENOMEM;
>> + goto done;
>> + }
>> + memset(&get_cmd, 0x0, sizeof(get_cmd));
>> + ret = ena_com_mem_addr_set(ena_dev,
>> + &get_cmd.u.control_buffer.address,
>> + phys_addr);
>> + if (unlikely(ret)) {
>> + ena_trc_err("memory address set failed\n");
>> + return ret;
>> + }
>> + get_cmd.u.control_buffer.length = len;
>> +
>> + get_cmd.device_id = ena_dev->stats_func;
>> + get_cmd.queue_idx = ena_dev->stats_queue;
>> +
>> + ret = ena_get_dev_stats(ena_dev, &get_cmd, &get_resp,
>> + ENA_ADMIN_GET_STATS_TYPE_EXTENDED);
>> + if (ret < 0)
>> + goto free_ext_stats_mem;
>> +
>> + ret = snprintf(buff, len, "%s", (char *)virt_addr);
> So ENA_ADMIN_GET_STATS_TYPE_EXTENDED fills a buffer with bytes in the
> [0; 127] range, right ?
ENA_ADMIN_GET_STATS_TYPE_EXTENDED fills a buffer with 4K bytes.
>
>> +
>> +free_ext_stats_mem:
>> + dma_free_coherent(ena_dev->dmadev, len, virt_addr, phys_addr);
>> +done:
>> + return ret;
>> +}
>> +
>> +int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, int mtu)
>> +{
>> + struct ena_com_admin_queue *admin_queue;
>> + struct ena_admin_set_feat_cmd cmd;
>> + struct ena_admin_set_feat_resp resp;
>> + int ret = 0;
> Should be -ENODEV or left uninitialized.
I'll initialize it to -ENODEV
>
>> +
>> + if (unlikely(!ena_dev)) {
>> + ena_trc_err("%s : ena_dev is NULL\n", __func__);
>> + return -ENODEV;
>> + }
> Does it mean that ena_com_dev may go away while the net_device is in use ?
ena_com_dev can't go away while net_device is alive.
I'll remove this check.
>
>> +
>> + if (!ena_com_check_supported_feature_id(ena_dev, ENA_ADMIN_MTU)) {
>> + ena_trc_info("Feature %d isn't supported\n", ENA_ADMIN_MTU);
>> + return -EPERM;
>> + }
> rc = ena_com_check_supported_feature_id(...
> if (rc < 0) {
> ena_trc_info(...
> goto out;
> }
>> +
>> + memset(&cmd, 0x0, sizeof(cmd));
>> + admin_queue = &ena_dev->admin_queue;
>> +
>> + cmd.aq_common_descriptor.opcode = ENA_ADMIN_SET_FEATURE;
>> + cmd.aq_common_descriptor.flags = 0;
>> + cmd.feat_common.feature_id = ENA_ADMIN_MTU;
>> + cmd.u.mtu.mtu = mtu;
>> +
>> + ret = ena_com_execute_admin_command(admin_queue,
>> + (struct ena_admin_aq_entry *)&cmd,
>> + sizeof(cmd),
>> + (struct ena_admin_acq_entry *)&resp,
>> + sizeof(resp));
>> +
>> + if (unlikely(ret)) {
>> + ena_trc_err("Failed to set mtu %d. error: %d\n", mtu, ret);
>> + return -EINVAL;
> ena_com_execute_admin_command should return a proper status code.
ena_com_execute_admin_command already returns a proper status.
I'll remove the return value override.
>
> [...]
> diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
> new file mode 100644
> index 0000000..e49ba43
> --- /dev/null
> [...]
> +static inline void ena_com_update_intr_reg(struct ena_eth_io_intr_reg *intr_reg,
> + u32 rx_delay_interval,
> + u32 tx_delay_interval,
> + bool unmask)
> +{
> + intr_reg->intr_control = 0;
> + intr_reg->intr_control |= rx_delay_interval &
> + ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;
> +
> + intr_reg->intr_control |=
> + (tx_delay_interval << ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_SHIFT)
> + & ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;
> ^^ TX ?
>
> Extra: you should not return NETDEV_TX_BUSY in the xmit handler while
> queueing is still enabled. Please drop packet and return NETDEV_TX_OK.
Ack.
Thanks for your review.
>