Re: Boot failure on emev2/kzm9d (was: Re: [PATCH v2 11/11] mm/slab: lockless decision to grow cache)
From: Geert Uytterhoeven
Date: Wed Jun 29 2016 - 10:55:57 EST
Hi Paul,
On Thu, Jun 23, 2016 at 4:53 AM, Paul E. McKenney
<paulmck@xxxxxxxxxxxxxxxxxx> wrote:
> On Wed, Jun 22, 2016 at 07:47:42PM -0700, Paul E. McKenney wrote:
>> On Thu, Jun 23, 2016 at 11:37:56AM +0900, Joonsoo Kim wrote:
>> > On Wed, Jun 22, 2016 at 05:49:35PM -0700, Paul E. McKenney wrote:
>> > > On Wed, Jun 22, 2016 at 12:08:59PM -0700, Paul E. McKenney wrote:
>> > > > On Wed, Jun 22, 2016 at 05:01:35PM +0200, Geert Uytterhoeven wrote:
>> > > > > On Wed, Jun 22, 2016 at 2:52 AM, Joonsoo Kim <iamjoonsoo.kim@xxxxxxx> wrote:
>> > > > > > Could you try below patch to check who causes the hang?
>> > > > > >
>> > > > > > And, if sysalt-t works when hang, could you get sysalt-t output? I haven't
>> > > > > > used it before but Paul could find some culprit on it. :)
>> > > > > >
>> > > > > > Thanks.
>> > > > > >
>> > > > > >
>> > > > > > ----->8-----
>> > > > > > diff --git a/mm/slab.c b/mm/slab.c
>> > > > > > index 763096a..9652d38 100644
>> > > > > > --- a/mm/slab.c
>> > > > > > +++ b/mm/slab.c
>> > > > > > @@ -964,8 +964,13 @@ static int setup_kmem_cache_node(struct kmem_cache *cachep,
>> > > > > > * guaranteed to be valid until irq is re-enabled, because it will be
>> > > > > > * freed after synchronize_sched().
>> > > > > > */
>> > > > > > - if (force_change)
>> > > > > > + if (force_change) {
>> > > > > > + if (num_online_cpus() > 1)
>> > > > > > + dump_stack();
>> > > > > > synchronize_sched();
>> > > > > > + if (num_online_cpus() > 1)
>> > > > > > + dump_stack();
>> > > > > > + }
>> > > > >
>> > > > > I've only added the first one, as I would never see the second one. All of
>> > > > > this happens before the serial console is activated, earlycon is not supported,
>> > > > > and I only have remote access.
>> > > > >
>> > > > > Brought up 2 CPUs
>> > > > > SMP: Total of 2 processors activated (2132.00 BogoMIPS).
>> > > > > CPU: All CPU(s) started in SVC mode.
>> > > > > CPU: 0 PID: 1 Comm: swapper/0 Not tainted
>> > > > > 4.7.0-rc4-kzm9d-00404-g4a235e6dde4404dd-dirty #89
>> > > > > Hardware name: Generic Emma Mobile EV2 (Flattened Device Tree)
>> > > > > [<c010de68>] (unwind_backtrace) from [<c010a658>] (show_stack+0x10/0x14)
>> > > > > [<c010a658>] (show_stack) from [<c02b5cf8>] (dump_stack+0x7c/0x9c)
>> > > > > [<c02b5cf8>] (dump_stack) from [<c01cfa4c>] (setup_kmem_cache_node+0x140/0x170)
>> > > > > [<c01cfa4c>] (setup_kmem_cache_node) from [<c01cfe3c>]
>> > > > > (__do_tune_cpucache+0xf4/0x114)
>> > > > > [<c01cfe3c>] (__do_tune_cpucache) from [<c01cff54>] (enable_cpucache+0xf8/0x148)
>> > > > > [<c01cff54>] (enable_cpucache) from [<c01d0190>]
>> > > > > (__kmem_cache_create+0x1a8/0x1d0)
>> > > > > [<c01d0190>] (__kmem_cache_create) from [<c01b32d0>]
>> > > > > (kmem_cache_create+0xbc/0x190)
>> > > > > [<c01b32d0>] (kmem_cache_create) from [<c070d968>] (shmem_init+0x34/0xb0)
>> > > > > [<c070d968>] (shmem_init) from [<c0700cc8>] (kernel_init_freeable+0x98/0x1ec)
>> > > > > [<c0700cc8>] (kernel_init_freeable) from [<c049fdbc>] (kernel_init+0x8/0x110)
>> > > > > [<c049fdbc>] (kernel_init) from [<c0106cb8>] (ret_from_fork+0x14/0x3c)
>> > > > > devtmpfs: initialized
>> > > >
>> > > > I don't see anything here that would prevent grace periods from completing.
>> > > >
>> > > > The CPUs are using the normal hotplug sequence to come online, correct?
>> > >
>> > > And either way, could you please apply the patch below and then
>> > > invoke rcu_dump_rcu_sched_tree() just before the offending call to
>> > > synchronize_sched()? That will tell me what CPUs RCU believes exist,
>> > > and perhaps also which CPU is holding it up.
>> >
>> > I can't find rcu_dump_rcu_sched_tree(). Do you mean
>> > rcu_dump_rcu_node_tree()? Anyway, there is no patch below so I attach
>> > one which does what Paul want, maybe.
>>
>> One of those days, I guess! :-/
>>
>> Your patch is exactly what I intended to send, thank you!
>
> Ah, but your telepathy was not sufficient to intuit the additional
> information I need. Please see the patch at the end. Your hunk
> in mm/slab.c is needed on top of my patch.
> @@ -4720,11 +4720,18 @@ static void __init rcu_dump_rcu_node_tree(struct rcu_state *rsp)
> pr_info(" ");
> level = rnp->level;
> }
> - pr_cont("%d:%d ^%d ", rnp->grplo, rnp->grphi, rnp->grpnum);
> + pr_cont("%d:%d/%#lx/%#lx ^%d ", rnp->grplo, rnp->grphi,
> + rnp->qsmask,
> + rnp->qsmaskinit | rnp->qsmaskinitnext, rnp->grpnum);
> }
> pr_cont("\n");
> }
For me it always crashes during the 37th call of synchronize_sched() in
setup_kmem_cache_node(), which is the first call after secondary CPU bring up.
With your and my debug code, I get:
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40100000 - 0x40100058
cnt = 36, sync
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (2132.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
rcu_node tree layout dump
0:1/0x0/0x3 ^0
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
I hope it helps. Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds