[PATCH] usb: xhci-plat: Add generic PHY support
From: Srinath Mannam
Date: Thu Jul 14 2016 - 04:34:25 EST
Generic phy support added in xhci platform driver.
In the case of multiple phys to the xhci controller, this approach
is helpful to pass multiple phandles to xhci platform driver from
xhci device node.
Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 676ea45..c734e2e 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -15,6 +15,7 @@
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/phy.h>
#include <linux/slab.h>
@@ -84,6 +85,52 @@ static int xhci_plat_start(struct usb_hcd *hcd)
return xhci_run(hcd);
}
+static int xhci_platform_phy_on(struct usb_hcd *hcd)
+{
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+ int ret, phy_num;
+
+ if (hcd->usb_phy) {
+ ret = usb_phy_init(hcd->usb_phy);
+ if (ret)
+ return ret;
+ }
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ ret = phy_init(priv->phys[phy_num]);
+ if (ret)
+ goto err_exit_phy;
+ ret = phy_power_on(priv->phys[phy_num]);
+ if (ret) {
+ phy_exit(priv->phys[phy_num]);
+ goto err_exit_phy;
+ }
+ }
+
+ return 0;
+
+err_exit_phy:
+ while (--phy_num >= 0) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
+
+ return ret;
+}
+
+static void xhci_platform_phy_off(struct usb_hcd *hcd)
+{
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+ int phy_num;
+
+ if (hcd->usb_phy)
+ usb_phy_shutdown(hcd->usb_phy);
+
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
+}
+
#ifdef CONFIG_OF
static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
@@ -146,8 +193,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct resource *res;
struct usb_hcd *hcd;
struct clk *clk;
+ struct xhci_plat_priv *priv;
int ret;
- int irq;
+ int irq, phy_num;
if (usb_disabled())
return -ENODEV;
@@ -199,10 +247,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
}
xhci = hcd_to_xhci(hcd);
+ priv = hcd_to_xhci_priv(hcd);
match = of_match_node(usb_xhci_of_match, node);
if (match) {
const struct xhci_plat_priv *priv_match = match->data;
- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
if (priv_match)
@@ -233,12 +281,32 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
hcd->usb_phy = NULL;
- } else {
- ret = usb_phy_init(hcd->usb_phy);
- if (ret)
+ }
+
+ priv->num_phys = of_count_phandle_with_args(pdev->dev.of_node,
+ "phys", "#phy-cells");
+
+ if (priv->num_phys > 0) {
+ priv->phys = devm_kcalloc(&pdev->dev, priv->num_phys,
+ sizeof(struct phy *), GFP_KERNEL);
+ if (!priv->phys)
+ return -ENOMEM;
+ } else
+ priv->num_phys = 0;
+
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ priv->phys[phy_num] = devm_of_phy_get_by_index(
+ &pdev->dev, pdev->dev.of_node, phy_num);
+ if (IS_ERR(priv->phys[phy_num])) {
+ ret = PTR_ERR(priv->phys[phy_num]);
goto put_usb3_hcd;
+ }
}
+ ret = xhci_platform_phy_on(hcd);
+ if (ret < 0)
+ goto put_usb3_hcd;
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
@@ -254,7 +322,7 @@ dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
- usb_phy_shutdown(hcd->usb_phy);
+ xhci_platform_phy_off(hcd);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
@@ -276,7 +344,7 @@ static int xhci_plat_remove(struct platform_device *dev)
struct clk *clk = xhci->clk;
usb_remove_hcd(xhci->shared_hcd);
- usb_phy_shutdown(hcd->usb_phy);
+ xhci_platform_phy_off(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(xhci->shared_hcd);
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index 9af0cb4..1fe9c21 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -15,6 +15,8 @@
struct xhci_plat_priv {
const char *firmware_name;
+ struct phy **phys;
+ int num_phys;
void (*plat_start)(struct usb_hcd *);
int (*init_quirk)(struct usb_hcd *);
};
--
2.9.0