Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD

[Marek Vasut]

On 08/03/2016 09:45 PM, Ksenija StanojeviÄ wrote:
> On Wed, Aug 3, 2016 at 9:39 PM, Marek Vasut <marex@xxxxxxx> wrote:
>> On 08/03/2016 09:34 PM, Ksenija StanojeviÄ wrote:
>>> On Wed, Aug 3, 2016 at 9:13 PM, Marek Vasut <marex@xxxxxxx> wrote:
>>>> On 08/03/2016 06:45 PM, Ksenija StanojeviÄ wrote:
>>>>> Hi Fabio,
>>>>
>>>> Hi,
>>>>
>>>>> On Wed, Aug 3, 2016 at 6:35 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
>>>>>> Hi Ksenija,
>>>>>>
>>>>>> On Wed, Aug 3, 2016 at 1:32 PM, Ksenija StanojeviÄ
>>>>>> <ksenija.stanojevic@xxxxxxxxx> wrote:
>>>>>>
>>>>>>> Can someone with imx23 board send me /proc/interrupts log, I
>>>>>>> need irq numbers...
>>>>>>
>>>>>> Can't you get them from the MX23 Reference Manual (Table 5-1. i.MX23
>>>>>> Interrupt Sources)?
>>>>>
>>>>> I thought it will be more reliable if I asked someone, since numbers from MX28
>>>>> manual don't match with /proc/interrupts log.
>>>>>
>>>> What do you mean they don't match ? Please elaborate.
>>>
>>> irqs don't have the same values in Table 5.1 in MX28 manual and in
>>> /proc/interrupts
>>> output.
>>>
>>> For example:
>>> touchscreen irq in MX28 manual have these values:
>>> 10 (source number) and 0x0028 (vector number)
>>>
>>> in /proc/interrupts:
>>> 210:          0         -  10 Edge      mxs-lradc-touchscreen
>>
>> I see lradc_touch_irq in the MX28RM is IRQ 10 and it is also 10 in your
>> /proc/interrupts output . What am I missing ?
> 
> I was referring to the number of the first column 210, that's the number that
> I need and cannot find in the Table of the manual.

The first number in /proc/interrupts is the number which Linux maps to
that particular IRQ line, but that number can be anything, it does not
(need to) match the hardware in any way. What do you need it for ?

-- 
Best regards,
Marek Vasut