Re: [RFC][PATCH 3/4] power: reset: Add sram-reboot-mode driver
From: Bjorn Andersson
Date: Wed Aug 03 2016 - 21:03:51 EST
On Wed 03 Aug 16:05 PDT 2016, John Stultz wrote:
[..]
> diff --git a/drivers/power/reset/sram-reboot-mode.c b/drivers/power/reset/sram-reboot-mode.c
[..]
> +
> +struct sram_reboot_mode {
> + struct reboot_mode_driver reboot;
> + void __iomem *reboot_reason_val_addr;
23 characters is...a lot of characters...
> +};
> +
> +static int sram_reboot_mode_write(struct reboot_mode_driver *reboot,
> + unsigned int magic)
> +{
> + struct sram_reboot_mode *sram_rbm;
> +
> + sram_rbm = container_of(reboot, struct sram_reboot_mode, reboot);
> +
> + writel(magic, sram_rbm->reboot_reason_val_addr);
> + return 0;
> +}
> +
> +static int sram_reboot_mode_probe(struct platform_device *pdev)
> +{
> + struct sram_reboot_mode *sram_rbm;
> + struct resource *res;
> + int ret;
> +
> + sram_rbm = devm_kzalloc(&pdev->dev, sizeof(*sram_rbm), GFP_KERNEL);
> + if (!sram_rbm)
> + return -ENOMEM;
> +
> + sram_rbm->reboot.dev = &pdev->dev;
> + sram_rbm->reboot.write = sram_reboot_mode_write;
> +
> + dev_set_drvdata(&pdev->dev, sram_rbm);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return PTR_ERR(res);
> +
> + sram_rbm->reboot_reason_val_addr = devm_ioremap(&pdev->dev, res->start,
> + resource_size(res));
Use devm_ioremap_resource() instead, it saves you the return value check
on platform_get_resource() and is cleaner.
> + if (IS_ERR(sram_rbm->reboot_reason_val_addr))
> + return PTR_ERR(sram_rbm->reboot_reason_val_addr);
> +
> + ret = reboot_mode_register(&sram_rbm->reboot);
I think you should take the time to throw in a
devm_reboot_mode_register(), it would save you from the
dev_set_drvdata() and you can drop the remove function.
> + if (ret)
> + dev_err(&pdev->dev, "can't register reboot mode\n");
> +
> + return ret;
> +}
> +
Regards,
Bjorn