[PATCH v4 1/2] serial: 8250_dw: make dw8250_set_termios as default set_termios callback

[Kefeng Wang]

Make dw8250_set_termios() handle all cases of dw8250_data->clk properly,
then we can safely use dw8250_set_termios() as the default set_termios
callback instead of serial8250_do_set_termios(), so do it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_dw.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 5c0c123..adecece 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -235,7 +235,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 	unsigned int rate;
 	int ret;
 
-	if (IS_ERR(d->clk) || !old)
+	if (IS_ERR_OR_NULL(d->clk) || !old)
 		goto out;
 
 	clk_disable_unprepare(d->clk);
@@ -308,13 +308,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			p->serial_in = dw8250_serial_in32;
 			data->uart_16550_compatible = true;
 		}
-		p->set_termios = dw8250_set_termios;
 	}
 
 	/* Platforms with iDMA */
 	if (platform_get_resource_byname(to_platform_device(p->dev),
 					 IORESOURCE_MEM, "lpss_priv")) {
-		p->set_termios = dw8250_set_termios;
 		data->dma.rx_param = p->dev->parent;
 		data->dma.tx_param = p->dev->parent;
 		data->dma.fn = dw8250_idma_filter;
@@ -391,6 +389,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	p->iotype	= UPIO_MEM;
 	p->serial_in	= dw8250_serial_in;
 	p->serial_out	= dw8250_serial_out;
+	p->set_termios	= dw8250_set_termios;
 
 	p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!p->membase)
-- 
1.7.12.4