Re: [PATCH 1/7] ARM: dts: exynos: Add missing memory node for Exynos5440 boards

From: Javier Martinez Canillas
Date: Thu Sep 01 2016 - 04:47:31 EST


Hello Krzysztof,

On 08/31/2016 07:46 PM, Krzysztof Kozlowski wrote:
> On Wed, Aug 31, 2016 at 02:14:33PM +0200, Javier Martinez Canillas wrote:
>> The skeleton.dtsi file was removed in ARM64 for different reasons as
>> explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
>>
>> These also applies to ARM and it will also allow to get rid of the
>> following DTC warnings in the future:
>>
>> "Node /memory has a reg or ranges property, but no unit name"
>>
>> But these boards don't have a memory node defined, so removing the
>> skeleton.dtsi inclusion in exynos4.dtsi will cause a change in the
>> compiled DTB. Add a dummy memory node so the compiled DTB doesn't
>> change if the skeleton.dtsi is removed from exynos4.dtsi.
>
> You mean extnos5440.dtsi?
>

Yes, I meant exynos5440.dtsi, it's a commit message copy and paste error.
Thanks for pointing out, I'll fix it in v2.

>>
>> Eventually the correct starting addresses and sizes should be used
>> but I didn't find that information.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>> ---
>>
>> arch/arm/boot/dts/exynos5440-sd5v1.dts | 5 +++++
>> arch/arm/boot/dts/exynos5440-ssdk5440.dts | 5 +++++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> index a98501bab6fc..333db4ff373a 100644
>> --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
>> @@ -20,6 +20,11 @@
>> bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
>> };
>>
>> + memory {
>> + device_type = "memory";
>> + reg = <0 0>;
>> + };
>> +
>> fixed-rate-clocks {
>> xtal {
>> compatible = "samsung,clock-xtal";
>> diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
>> index 6a0d802e87c8..82fea6f94704 100644
>> --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
>> +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
>> @@ -21,6 +21,11 @@
>> bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
>> };
>>
>> + memory {
>> + device_type = "memory";
>> + reg = <0 0>;
>> + };
>
> This looks okay, but the default size and address cells won't be
> present. Won't that be a problem?
>

They will be present since at this point exynos5440.dtsi is still including
exynos5440.dtsi, we are just overriding the memory node with the same values
than skeleton.dtsi so this can be removed later in patch 7/7.

> Best regards,
> Krzysztof
>

Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America