Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support

[Jagan Teki]

On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
> On 23.9.2016 09:39, Jagan Teki wrote:
>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
>>> On 22.9.2016 22:59, SÃren Brinkmann wrote:
>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>> From: Jagan Teki <jteki@xxxxxxxxxxxx>
>>>>>
>>>>> Added basic dts support for MicroZed board.
>>>>>
>>>>> - UART
>>>>> - SDHCI
>>>>> - Ethernet
>>>>>
>>>>> Cc: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
>>>>> Cc: Michal Simek <michal.simek@xxxxxxxxxx>
>>>>> Signed-off-by: Jagan Teki <jteki@xxxxxxxxxxxx>
>>>>> ---
>>>>> Changes for v2:
>>>>>      - Add SDHCI
>>>>>      - Add Ethernet
>>>>>
>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>  2 files changed, 96 insertions(+)
>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>> index faacd52..4d7b858 100644
>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>      wm8750-apc8750.dtb \
>>>>>      wm8850-w70v2.dtb
>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>> +    zynq-microzed.dtb \
>>>>>      zynq-parallella.dtb \
>>>>>      zynq-zc702.dtb \
>>>>>      zynq-zc706.dtb \
>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> new file mode 100644
>>>>> index 0000000..9e64496
>>>>> --- /dev/null
>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> @@ -0,0 +1,95 @@
>>>>> +/*
>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@xxxxxxxxxxxx>
>>>
>>>
>>> Did you created only yourself without copying part of this from others?
>>> There is dts in u-boot which I believe you are aware of.
>>
>> I sent the initial one few months back so at that time, I was created
>> and now I just added USB and Ethernet with the reference of zc702
>> board.
>
> Can you send me a link to that post? I didn't find it.

Here is the link [1]

> Anyway you should keep Xilinx copyright there.

OK then will append Xilinx as well.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

thanks!
-- 
Jagan.