Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support

[Michal Simek]

On 23.9.2016 10:42, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
>> On 23.9.2016 09:39, Jagan Teki wrote:
>>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
>>>> On 22.9.2016 22:59, SÃren Brinkmann wrote:
>>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>>> From: Jagan Teki <jteki@xxxxxxxxxxxx>
>>>>>>
>>>>>> Added basic dts support for MicroZed board.
>>>>>>
>>>>>> - UART
>>>>>> - SDHCI
>>>>>> - Ethernet
>>>>>>
>>>>>> Cc: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
>>>>>> Cc: Michal Simek <michal.simek@xxxxxxxxxx>
>>>>>> Signed-off-by: Jagan Teki <jteki@xxxxxxxxxxxx>
>>>>>> ---
>>>>>> Changes for v2:
>>>>>>      - Add SDHCI
>>>>>>      - Add Ethernet
>>>>>>
>>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>>  2 files changed, 96 insertions(+)
>>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>>> index faacd52..4d7b858 100644
>>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>>      wm8750-apc8750.dtb \
>>>>>>      wm8850-w70v2.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>>> +    zynq-microzed.dtb \
>>>>>>      zynq-parallella.dtb \
>>>>>>      zynq-zc702.dtb \
>>>>>>      zynq-zc706.dtb \
>>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> new file mode 100644
>>>>>> index 0000000..9e64496
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> @@ -0,0 +1,95 @@
>>>>>> +/*
>>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@xxxxxxxxxxxx>
>>>>
>>>>
>>>> Did you created only yourself without copying part of this from others?
>>>> There is dts in u-boot which I believe you are aware of.
>>>
>>> I sent the initial one few months back so at that time, I was created
>>> and now I just added USB and Ethernet with the reference of zc702
>>> board.
>>
>> Can you send me a link to that post? I didn't find it.
> 
> Here is the link [1]
> 
>> Anyway you should keep Xilinx copyright there.
> 
> OK then will append Xilinx as well.
> 
> [1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

ok. It was lkml and devicetree not arm mailing list that's why I didn't
find it.

Thanks,
Michal