[PATCH v7, 6/8] usb: mtu3: host only mode support
From: Chunfeng Yun
Date: Tue Oct 18 2016 - 22:29:52 EST
supports host only mode and the code is ported from
host/xhci-mtk.c
IPPC register shared between host and device is moved
into common glue layer.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/mtu3/Kconfig | 9 ++
drivers/usb/mtu3/Makefile | 11 +-
drivers/usb/mtu3/mtu3.h | 47 ++++++-
drivers/usb/mtu3/mtu3_core.c | 42 +++++-
drivers/usb/mtu3/mtu3_dr.h | 85 +++++++++++++
drivers/usb/mtu3/mtu3_host.c | 288 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/mtu3/mtu3_plat.c | 289 ++++++++++++++++++++++++++++++++----------
7 files changed, 691 insertions(+), 80 deletions(-)
create mode 100644 drivers/usb/mtu3/mtu3_dr.h
create mode 100644 drivers/usb/mtu3/mtu3_host.c
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 54dadee..59e3f6f 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -4,6 +4,7 @@ config USB_MTU3
tristate "MediaTek USB3 Dual Role controller"
depends on (USB || USB_GADGET) && HAS_DMA
depends on ARCH_MEDIATEK || COMPILE_TEST
+ select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system runs on MediaTek SoCs with
Dual Role SuperSpeed USB controller. You can select usb
@@ -18,8 +19,16 @@ config USB_MTU3
if USB_MTU3
choice
bool "MTU3 Mode Selection"
+ default USB_MTU3_HOST if (USB && !USB_GADGET)
default USB_MTU3_GADGET if (!USB && USB_GADGET)
+config USB_MTU3_HOST
+ bool "Host only mode"
+ depends on USB=y || USB=USB_MTU3
+ help
+ Select this when you want to use MTU3 in host mode only,
+ thereby the gadget feature will be regressed.
+
config USB_MTU3_GADGET
bool "Gadget only mode"
depends on USB_GADGET=y || USB_GADGET=USB_MTU3
diff --git a/drivers/usb/mtu3/Makefile b/drivers/usb/mtu3/Makefile
index 532c257..41e45e9 100644
--- a/drivers/usb/mtu3/Makefile
+++ b/drivers/usb/mtu3/Makefile
@@ -1,2 +1,11 @@
obj-$(CONFIG_USB_MTU3) += mtu3.o
-mtu3-y := mtu3_plat.o mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o mtu3_qmu.o
+
+mtu3-y := mtu3_plat.o
+
+ifneq ($(filter y,$(CONFIG_USB_MTU3_HOST)),)
+ mtu3-y += mtu3_host.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_MTU3_GADGET)),)
+ mtu3-y += mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o mtu3_qmu.o
+endif
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 41a0473..a7c0ce8 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -172,6 +172,40 @@ struct mtu3_gpd_ring {
struct qmu_gpd *enqueue;
struct qmu_gpd *dequeue;
};
+/**
+ * @mac_base: register base address of device MAC, exclude xHCI's
+ * @ippc_base: register base address of ip port controller interface (IPPC)
+ * @vusb33: usb3.3V shared by device/host IP
+ * @sys_clk: system clock of mtu3, shared by device/host IP
+ * @dr_mode: works in which mode:
+ * host only, device only or dual-role mode
+ * @u2_ports: number of usb2.0 host ports
+ * @u3_ports: number of usb3.0 host ports
+ * @wakeup_en: it's true when supports remote wakeup in host mode
+ * @wk_deb_p0: port0's wakeup debounce clock
+ * @wk_deb_p1: it's optional, and depends on port1 is supported or not
+ */
+struct ssusb_mtk {
+ struct device *dev;
+ struct mtu3 *u3d;
+ void __iomem *mac_base;
+ void __iomem *ippc_base;
+ struct phy **phys;
+ int num_phys;
+ /* common power & clock */
+ struct regulator *vusb33;
+ struct clk *sys_clk;
+ /* otg */
+ enum usb_dr_mode dr_mode;
+ bool is_host;
+ int u2_ports;
+ int u3_ports;
+ /* usb wakeup for host mode */
+ bool wakeup_en;
+ struct clk *wk_deb_p0;
+ struct clk *wk_deb_p1;
+ struct regmap *pericfg;
+};
/**
* @fifo_size: it is (@slot + 1) * @fifo_seg_size
@@ -210,6 +244,11 @@ struct mtu3_request {
int epnum;
};
+static inline struct ssusb_mtk *dev_to_ssusb(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
/**
* struct mtu3 - device driver instance data.
* @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,
@@ -222,12 +261,10 @@ struct mtu3_request {
*/
struct mtu3 {
spinlock_t lock;
+ struct ssusb_mtk *ssusb;
struct device *dev;
void __iomem *mac_base;
void __iomem *ippc_base;
- struct phy *phy;
- struct regulator *vusb33;
- struct clk *sys_clk;
int irq;
struct mtu3_fifo_info tx_fifo;
@@ -320,7 +357,7 @@ static inline void mtu3_clrbits(void __iomem *base, u32 offset, u32 bits)
writel((tmp & ~(bits)), addr);
}
-int ssusb_check_clocks(struct mtu3 *mtu, u32 ex_clks);
+int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks);
struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
void mtu3_free_request(struct usb_ep *ep, struct usb_request *req);
void mtu3_req_complete(struct mtu3_ep *mep,
@@ -341,8 +378,6 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
void mtu3_gadget_suspend(struct mtu3 *mtu);
void mtu3_gadget_resume(struct mtu3 *mtu);
void mtu3_gadget_disconnect(struct mtu3 *mtu);
-int ssusb_gadget_init(struct mtu3 *mtu);
-void ssusb_gadget_exit(struct mtu3 *mtu);
irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu);
extern const struct usb_ep_ops mtu3_ep0_ops;
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index f9817ad..2eef972 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -116,7 +116,7 @@ static int mtu3_device_enable(struct mtu3 *mtu)
SSUSB_U2_PORT_HOST_SEL));
mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
- return ssusb_check_clocks(mtu, check_clk);
+ return ssusb_check_clocks(mtu->ssusb, check_clk);
}
static void mtu3_device_disable(struct mtu3 *mtu)
@@ -765,11 +765,38 @@ static void mtu3_hw_exit(struct mtu3 *mtu)
/*-------------------------------------------------------------------------*/
-int ssusb_gadget_init(struct mtu3 *mtu)
+int ssusb_gadget_init(struct ssusb_mtk *ssusb)
{
- struct device *dev = mtu->dev;
- int ret;
+ struct device *dev = ssusb->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mtu3 *mtu = NULL;
+ struct resource *res;
+ int ret = -ENOMEM;
+
+ mtu = devm_kzalloc(dev, sizeof(struct mtu3), GFP_KERNEL);
+ if (mtu == NULL)
+ return -ENOMEM;
+
+ mtu->irq = platform_get_irq(pdev, 0);
+ if (mtu->irq <= 0) {
+ dev_err(dev, "fail to get irq number\n");
+ return -ENODEV;
+ }
+ dev_info(dev, "irq %d\n", mtu->irq);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
+ mtu->mac_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mtu->mac_base)) {
+ dev_err(dev, "error mapping memory for dev mac\n");
+ return PTR_ERR(mtu->mac_base);
+ }
+
+ spin_lock_init(&mtu->lock);
+ mtu->dev = dev;
+ mtu->ippc_base = ssusb->ippc_base;
+ ssusb->mac_base = mtu->mac_base;
+ ssusb->u3d = mtu;
+ mtu->ssusb = ssusb;
mtu->max_speed = usb_get_maximum_speed(dev);
/* check the max_speed parameter */
@@ -820,14 +847,17 @@ int ssusb_gadget_init(struct mtu3 *mtu)
irq_err:
mtu3_hw_exit(mtu);
+ ssusb->u3d = NULL;
dev_err(dev, " %s() fail...\n", __func__);
return ret;
}
-void ssusb_gadget_exit(struct mtu3 *mtu)
+void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
{
+ struct mtu3 *mtu = ssusb->u3d;
+
mtu3_gadget_cleanup(mtu);
- device_init_wakeup(mtu->dev, false);
+ device_init_wakeup(ssusb->dev, false);
mtu3_hw_exit(mtu);
}
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
new file mode 100644
index 0000000..07066f4
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -0,0 +1,85 @@
+/*
+ * mtu3_dr.h - dual role switch and host glue layer header
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _MTU3_DR_H_
+#define _MTU3_DR_H_
+
+#if IS_ENABLED(CONFIG_USB_MTU3_HOST)
+
+int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn);
+void ssusb_host_exit(struct ssusb_mtk *ssusb);
+int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
+ struct device_node *dn);
+int ssusb_host_enable(struct ssusb_mtk *ssusb);
+int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend);
+int ssusb_wakeup_enable(struct ssusb_mtk *ssusb);
+void ssusb_wakeup_disable(struct ssusb_mtk *ssusb);
+
+#else
+
+static inline int ssusb_host_init(struct ssusb_mtk *ssusb,
+
+ struct device_node *parent_dn)
+{
+ return 0;
+}
+
+static inline void ssusb_host_exit(struct ssusb_mtk *ssusb)
+{}
+
+static inline int ssusb_wakeup_of_property_parse(
+ struct ssusb_mtk *ssusb, struct device_node *dn)
+{
+ return 0;
+}
+
+static inline int ssusb_host_enable(struct ssusb_mtk *ssusb)
+{
+ return 0;
+}
+
+static inline int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
+{
+ return 0;
+}
+
+static inline int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
+{
+ return 0;
+}
+
+static inline void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
+{}
+
+#endif
+
+
+#if IS_ENABLED(CONFIG_USB_MTU3_GADGET)
+int ssusb_gadget_init(struct ssusb_mtk *ssusb);
+void ssusb_gadget_exit(struct ssusb_mtk *ssusb);
+#else
+static inline int ssusb_gadget_init(struct ssusb_mtk *ssusb)
+{
+ return 0;
+}
+
+static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
+{}
+#endif
+
+#endif /* _MTU3_DR_H_ */
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
new file mode 100644
index 0000000..361d6d8
--- /dev/null
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -0,0 +1,288 @@
+/*
+ * mtu3_dr.c - dual role switch and host glue layer
+ *
+ * Copyright (C) 2016 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include "mtu3.h"
+#include "mtu3_dr.h"
+
+#define PERI_WK_CTRL1 0x404
+#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
+#define UWK_CTL1_IS_E BIT(25)
+#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
+#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
+#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
+#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
+
+/*
+ * ip-sleep wakeup mode:
+ * all clocks can be turn off, but power domain should be kept on
+ */
+static void ssusb_wakeup_ip_sleep_en(struct ssusb_mtk *ssusb)
+{
+ u32 tmp;
+ struct regmap *pericfg = ssusb->pericfg;
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_P;
+ tmp &= ~(UWK_CTL1_IS_C(0xf));
+ tmp |= UWK_CTL1_IS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ dev_dbg(ssusb->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
+ __func__, tmp);
+}
+
+static void ssusb_wakeup_ip_sleep_dis(struct ssusb_mtk *ssusb)
+{
+ u32 tmp;
+
+ regmap_read(ssusb->pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_E;
+ regmap_write(ssusb->pericfg, PERI_WK_CTRL1, tmp);
+}
+
+int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
+ struct device_node *dn)
+{
+ struct device *dev = ssusb->dev;
+
+ /*
+ * Wakeup function is optional, so it is not an error if this property
+ * does not exist, and in such case, no need to get relative
+ * properties anymore.
+ */
+ ssusb->wakeup_en = of_property_read_bool(dn, "mediatek,enable-wakeup");
+ if (!ssusb->wakeup_en)
+ return 0;
+
+ ssusb->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
+ if (IS_ERR(ssusb->wk_deb_p0)) {
+ dev_err(dev, "fail to get wakeup_deb_p0\n");
+ return PTR_ERR(ssusb->wk_deb_p0);
+ }
+
+ if (of_property_read_bool(dn, "wakeup_deb_p1")) {
+ ssusb->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
+ if (IS_ERR(ssusb->wk_deb_p1)) {
+ dev_err(dev, "fail to get wakeup_deb_p1\n");
+ return PTR_ERR(ssusb->wk_deb_p1);
+ }
+ }
+
+ ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
+ "mediatek,syscon-wakeup");
+ if (IS_ERR(ssusb->pericfg)) {
+ dev_err(dev, "fail to get pericfg regs\n");
+ return PTR_ERR(ssusb->pericfg);
+ }
+
+ return 0;
+}
+
+static int ssusb_wakeup_clks_enable(struct ssusb_mtk *ssusb)
+{
+ int ret;
+
+ ret = clk_prepare_enable(ssusb->wk_deb_p0);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable wk_deb_p0\n");
+ goto usb_p0_err;
+ }
+
+ ret = clk_prepare_enable(ssusb->wk_deb_p1);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable wk_deb_p1\n");
+ goto usb_p1_err;
+ }
+
+ return 0;
+
+usb_p1_err:
+ clk_disable_unprepare(ssusb->wk_deb_p0);
+usb_p0_err:
+ return -EINVAL;
+}
+
+static void ssusb_wakeup_clks_disable(struct ssusb_mtk *ssusb)
+{
+ clk_disable_unprepare(ssusb->wk_deb_p1);
+ clk_disable_unprepare(ssusb->wk_deb_p0);
+}
+
+static void host_ports_num_get(struct ssusb_mtk *ssusb)
+{
+ u32 xhci_cap;
+
+ xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
+ ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
+ ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);
+
+ dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
+ ssusb->u2_ports, ssusb->u3_ports);
+}
+
+/* only configure ports will be used later */
+int ssusb_host_enable(struct ssusb_mtk *ssusb)
+{
+ void __iomem *ibase = ssusb->ippc_base;
+ int num_u3p = ssusb->u3_ports;
+ int num_u2p = ssusb->u2_ports;
+ u32 check_clk;
+ u32 value;
+ int i;
+
+ /* power on host ip */
+ mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+ /* power on and enable all u3 ports */
+ for (i = 0; i < num_u3p; i++) {
+ value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+ value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
+ value |= SSUSB_U3_PORT_HOST_SEL;
+ mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+ }
+
+ /* power on and enable all u2 ports */
+ for (i = 0; i < num_u2p; i++) {
+ value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+ value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
+ value |= SSUSB_U2_PORT_HOST_SEL;
+ mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+ }
+
+ check_clk = SSUSB_XHCI_RST_B_STS;
+ if (num_u3p)
+ check_clk = SSUSB_U3_MAC_RST_B_STS;
+
+ return ssusb_check_clocks(ssusb, check_clk);
+}
+
+int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
+{
+ void __iomem *ibase = ssusb->ippc_base;
+ int num_u3p = ssusb->u3_ports;
+ int num_u2p = ssusb->u2_ports;
+ u32 value;
+ int ret;
+ int i;
+
+ /* power down and disable all u3 ports */
+ for (i = 0; i < num_u3p; i++) {
+ value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+ value |= SSUSB_U3_PORT_PDN;
+ value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
+ mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+ }
+
+ /* power down and disable all u2 ports */
+ for (i = 0; i < num_u2p; i++) {
+ value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+ value |= SSUSB_U2_PORT_PDN;
+ value |= suspend ? 0 : SSUSB_U2_PORT_DIS;
+ mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+ }
+
+ /* power down host ip */
+ mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+ if (!suspend)
+ return 0;
+
+ /* wait for host ip to sleep */
+ ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
+ (value & SSUSB_IP_SLEEP_STS), 100, 100000);
+ if (ret)
+ dev_err(ssusb->dev, "ip sleep failed!!!\n");
+
+ return ret;
+}
+
+static void ssusb_host_setup(struct ssusb_mtk *ssusb)
+{
+ host_ports_num_get(ssusb);
+
+ /*
+ * power on host and power on/enable all ports
+ * if support OTG, gadget driver will switch port0 to device mode
+ */
+ ssusb_host_enable(ssusb);
+}
+
+static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
+{
+ ssusb_host_disable(ssusb, false);
+}
+
+/*
+ * If host supports multiple ports, the VBUSes(5V) of ports except port0
+ * which supports OTG are better to be enabled by default in DTS.
+ * Because the host driver will keep link with devices attached when system
+ * enters suspend mode, so no need to control VBUSes after initialization.
+ */
+int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
+{
+ struct device *parent_dev = ssusb->dev;
+ int ret;
+
+ ssusb_host_setup(ssusb);
+
+ ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
+ if (ret) {
+ dev_dbg(parent_dev, "failed to create child devices at %s\n",
+ parent_dn->full_name);
+ return ret;
+ }
+
+ dev_info(parent_dev, "xHCI platform device register success...\n");
+
+ return 0;
+}
+
+void ssusb_host_exit(struct ssusb_mtk *ssusb)
+{
+ of_platform_depopulate(ssusb->dev);
+ ssusb_host_cleanup(ssusb);
+}
+
+int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
+{
+ int ret = 0;
+
+ if (ssusb->wakeup_en) {
+ ret = ssusb_wakeup_clks_enable(ssusb);
+ ssusb_wakeup_ip_sleep_en(ssusb);
+ }
+ return ret;
+}
+
+void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
+{
+ if (ssusb->wakeup_en) {
+ ssusb_wakeup_ip_sleep_dis(ssusb);
+ ssusb_wakeup_clks_disable(ssusb);
+ }
+}
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 52fc0ed..facb76c 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -21,14 +21,16 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include "mtu3.h"
+#include "mtu3_dr.h"
/* u2-port0 should be powered on and enabled; */
-int ssusb_check_clocks(struct mtu3 *mtu, u32 ex_clks)
+int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
{
- void __iomem *ibase = mtu->ippc_base;
+ void __iomem *ibase = ssusb->ippc_base;
u32 value, check_val;
int ret;
@@ -38,136 +40,209 @@ int ssusb_check_clocks(struct mtu3 *mtu, u32 ex_clks)
ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
(check_val == (value & check_val)), 100, 20000);
if (ret) {
- dev_err(mtu->dev, "clks of sts1 are not stable!\n");
+ dev_err(ssusb->dev, "clks of sts1 are not stable!\n");
return ret;
}
ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value,
(value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000);
if (ret) {
- dev_err(mtu->dev, "mac2 clock is not stable\n");
+ dev_err(ssusb->dev, "mac2 clock is not stable\n");
return ret;
}
return 0;
}
-static int ssusb_rscs_init(struct mtu3 *mtu)
+static int ssusb_phy_init(struct ssusb_mtk *ssusb)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ssusb->num_phys; i++) {
+ ret = phy_init(ssusb->phys[i]);
+ if (ret)
+ goto exit_phy;
+ }
+ return 0;
+
+exit_phy:
+ for (; i > 0; i--)
+ phy_exit(ssusb->phys[i - 1]);
+
+ return ret;
+}
+
+static int ssusb_phy_exit(struct ssusb_mtk *ssusb)
+{
+ int i;
+
+ for (i = 0; i < ssusb->num_phys; i++)
+ phy_exit(ssusb->phys[i]);
+
+ return 0;
+}
+
+static int ssusb_phy_power_on(struct ssusb_mtk *ssusb)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ssusb->num_phys; i++) {
+ ret = phy_power_on(ssusb->phys[i]);
+ if (ret)
+ goto power_off_phy;
+ }
+ return 0;
+
+power_off_phy:
+ for (; i > 0; i--)
+ phy_power_off(ssusb->phys[i - 1]);
+
+ return ret;
+}
+
+static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
+{
+ unsigned int i;
+
+ for (i = 0; i < ssusb->num_phys; i++)
+ phy_power_off(ssusb->phys[i]);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
{
int ret = 0;
- ret = regulator_enable(mtu->vusb33);
+ ret = regulator_enable(ssusb->vusb33);
if (ret) {
- dev_err(mtu->dev, "failed to enable vusb33\n");
+ dev_err(ssusb->dev, "failed to enable vusb33\n");
goto vusb33_err;
}
- ret = clk_prepare_enable(mtu->sys_clk);
+ ret = clk_prepare_enable(ssusb->sys_clk);
if (ret) {
- dev_err(mtu->dev, "failed to enable sys_clk\n");
+ dev_err(ssusb->dev, "failed to enable sys_clk\n");
goto clk_err;
}
- ret = phy_init(mtu->phy);
+ ret = ssusb_phy_init(ssusb);
if (ret) {
- dev_err(mtu->dev, "failed to init phy\n");
+ dev_err(ssusb->dev, "failed to init phy\n");
goto phy_init_err;
}
- ret = phy_power_on(mtu->phy);
+ ret = ssusb_phy_power_on(ssusb);
if (ret) {
- dev_err(mtu->dev, "failed to power on phy\n");
+ dev_err(ssusb->dev, "failed to power on phy\n");
goto phy_err;
}
return 0;
phy_err:
- phy_exit(mtu->phy);
+ ssusb_phy_exit(ssusb);
phy_init_err:
- clk_disable_unprepare(mtu->sys_clk);
+ clk_disable_unprepare(ssusb->sys_clk);
clk_err:
- regulator_disable(mtu->vusb33);
+ regulator_disable(ssusb->vusb33);
vusb33_err:
return ret;
}
-static void ssusb_rscs_exit(struct mtu3 *mtu)
+static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
{
- clk_disable_unprepare(mtu->sys_clk);
- regulator_disable(mtu->vusb33);
- phy_power_off(mtu->phy);
- phy_exit(mtu->phy);
+ clk_disable_unprepare(ssusb->sys_clk);
+ regulator_disable(ssusb->vusb33);
+ ssusb_phy_power_off(ssusb);
+ ssusb_phy_exit(ssusb);
}
-static void ssusb_ip_sw_reset(struct mtu3 *mtu)
+static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
{
- mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+ /* reset whole ip (xhci & u3d) */
+ mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
udelay(1);
- mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+ mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
}
-static int get_ssusb_rscs(struct platform_device *pdev, struct mtu3 *mtu)
+static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
{
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct resource *res;
+ int i;
+ int ret;
- mtu->phy = devm_of_phy_get_by_index(dev, node, 0);
- if (IS_ERR(mtu->phy)) {
- dev_err(dev, "failed to get phy\n");
- return PTR_ERR(mtu->phy);
- }
-
- mtu->irq = platform_get_irq(pdev, 0);
- if (mtu->irq <= 0) {
- dev_err(dev, "fail to get irq number\n");
- return -ENODEV;
+ ssusb->num_phys = of_count_phandle_with_args(node,
+ "phys", "#phy-cells");
+ if (ssusb->num_phys > 0) {
+ ssusb->phys = devm_kcalloc(dev, ssusb->num_phys,
+ sizeof(*ssusb->phys), GFP_KERNEL);
+ if (!ssusb->phys)
+ return -ENOMEM;
+ } else {
+ ssusb->num_phys = 0;
}
- dev_info(dev, "irq %d\n", mtu->irq);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
- mtu->mac_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(mtu->mac_base)) {
- dev_err(dev, "error mapping memory for dev mac\n");
- return PTR_ERR(mtu->mac_base);
+ for (i = 0; i < ssusb->num_phys; i++) {
+ ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i);
+ if (IS_ERR(ssusb->phys[i])) {
+ dev_err(dev, "failed to get phy-%d\n", i);
+ return PTR_ERR(ssusb->phys[i]);
+ }
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
- mtu->ippc_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(mtu->ippc_base)) {
+ ssusb->ippc_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ssusb->ippc_base)) {
dev_err(dev, "failed to map memory for ippc\n");
- return PTR_ERR(mtu->ippc_base);
+ return PTR_ERR(ssusb->ippc_base);
}
- mtu->vusb33 = devm_regulator_get(&pdev->dev, "vusb33");
- if (IS_ERR(mtu->vusb33)) {
+ ssusb->vusb33 = devm_regulator_get(&pdev->dev, "vusb33");
+ if (IS_ERR(ssusb->vusb33)) {
dev_err(dev, "failed to get vusb33\n");
- return PTR_ERR(mtu->vusb33);
+ return PTR_ERR(ssusb->vusb33);
}
- mtu->sys_clk = devm_clk_get(dev, "sys_ck");
- if (IS_ERR(mtu->sys_clk)) {
+ ssusb->sys_clk = devm_clk_get(dev, "sys_ck");
+ if (IS_ERR(ssusb->sys_clk)) {
dev_err(dev, "failed to get sys clock\n");
- return PTR_ERR(mtu->sys_clk);
+ return PTR_ERR(ssusb->sys_clk);
+ }
+
+ ssusb->dr_mode = usb_get_dr_mode(dev);
+ if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN) {
+ dev_err(dev, "dr_mode is error\n");
+ return -EINVAL;
}
+ if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
+ return 0;
+
+ /* if host role is supported */
+ ret = ssusb_wakeup_of_property_parse(ssusb, node);
+ if (ret)
+ return ret;
+
return 0;
}
static int mtu3_probe(struct platform_device *pdev)
{
+ struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
- struct mtu3 *mtu;
+ struct ssusb_mtk *ssusb;
int ret = -ENOMEM;
/* all elements are set to ZERO as default value */
- mtu = devm_kzalloc(dev, sizeof(struct mtu3), GFP_KERNEL);
- if (!mtu)
+ ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL);
+ if (!ssusb)
return -ENOMEM;
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
@@ -176,11 +251,10 @@ static int mtu3_probe(struct platform_device *pdev)
return -ENOTSUPP;
}
- platform_set_drvdata(pdev, mtu);
- mtu->dev = dev;
- spin_lock_init(&mtu->lock);
+ platform_set_drvdata(pdev, ssusb);
+ ssusb->dev = dev;
- ret = get_ssusb_rscs(pdev, mtu);
+ ret = get_ssusb_rscs(pdev, ssusb);
if (ret)
return ret;
@@ -189,22 +263,45 @@ static int mtu3_probe(struct platform_device *pdev)
pm_runtime_get_sync(dev);
device_enable_async_suspend(dev);
- ret = ssusb_rscs_init(mtu);
+ ret = ssusb_rscs_init(ssusb);
if (ret)
goto comm_init_err;
- ssusb_ip_sw_reset(mtu);
-
- ret = ssusb_gadget_init(mtu);
- if (ret) {
- dev_err(dev, "failed to initialize gadget\n");
+ ssusb_ip_sw_reset(ssusb);
+
+ if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
+ ssusb->dr_mode = USB_DR_MODE_HOST;
+ else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET))
+ ssusb->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+ /* default as host */
+ ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL);
+
+ switch (ssusb->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ ret = ssusb_gadget_init(ssusb);
+ if (ret) {
+ dev_err(dev, "failed to initialize gadget\n");
+ goto comm_exit;
+ }
+ break;
+ case USB_DR_MODE_HOST:
+ ret = ssusb_host_init(ssusb, node);
+ if (ret) {
+ dev_err(dev, "failed to initialize host\n");
+ goto comm_exit;
+ }
+ break;
+ default:
+ dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode);
+ ret = -EINVAL;
goto comm_exit;
}
return 0;
comm_exit:
- ssusb_rscs_exit(mtu);
+ ssusb_rscs_exit(ssusb);
comm_init_err:
pm_runtime_put_sync(dev);
@@ -215,16 +312,73 @@ static int mtu3_probe(struct platform_device *pdev)
static int mtu3_remove(struct platform_device *pdev)
{
- struct mtu3 *mtu = platform_get_drvdata(pdev);
+ struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+
+ switch (ssusb->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ ssusb_gadget_exit(ssusb);
+ break;
+ case USB_DR_MODE_HOST:
+ ssusb_host_exit(ssusb);
+ break;
+ default:
+ return -EINVAL;
+ }
- ssusb_gadget_exit(mtu);
- ssusb_rscs_exit(mtu);
+ ssusb_rscs_exit(ssusb);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
+/*
+ * when support dual-role mode, we reject suspend when
+ * it works as device mode;
+ */
+static int __maybe_unused mtu3_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ /* REVISIT: disconnect it for only device mode? */
+ if (!ssusb->is_host)
+ return 0;
+
+ ssusb_host_disable(ssusb, true);
+ ssusb_phy_power_off(ssusb);
+ clk_disable_unprepare(ssusb->sys_clk);
+ ssusb_wakeup_enable(ssusb);
+
+ return 0;
+}
+
+static int __maybe_unused mtu3_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ if (!ssusb->is_host)
+ return 0;
+
+ ssusb_wakeup_disable(ssusb);
+ clk_prepare_enable(ssusb->sys_clk);
+ ssusb_phy_power_on(ssusb);
+ ssusb_host_enable(ssusb);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mtu3_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
+};
+
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
+
#ifdef CONFIG_OF
static const struct of_device_id mtu3_of_match[] = {
@@ -241,6 +395,7 @@ static int mtu3_remove(struct platform_device *pdev)
.remove = mtu3_remove,
.driver = {
.name = MTU3_DRIVER_NAME,
+ .pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(mtu3_of_match),
},
};
--
1.7.9.5