Re: pinctrl_cherryview: massive error messages (handle_bad_irq)

[Christian Steiner]

On 19.10.2016 21:22, Mika Westerberg wrote:
> On Wed, Oct 19, 2016 at 06:32:57PM +0000, Christian Steiner wrote:
>> Hello,
>>
>> since Kernel 4.8 I see a lot of the following error messages after
>> resuming from suspend to RAM:
>>
>>> irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0
>>> ->handle_irq():  ffffffff8109b613, handle_bad_irq+0x0/0x1e0
>>> ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview]
>>> ->action():           (null)
>>>    IRQ_NOPROBE set
>>
>> The messages appear a few thousand times and mess up the log. Despite
>> the messages everything seems to work fine.
>> I see the messages with Kernel 4.8.2 and 4.9-rc1. The do not appear with
>> Kernel 4.7.8 or earlier.
> 
> We changed the driver not to mask all IRQs when it starts. See commit
> bcb48cca23ec ("pinctrl: cherryview: Do not mask all interrupts in
> probe").
> 
>> I have an Acer TravelMate B116-M laptop with an Intel Pentium N3700
>> processor.
>>
>> Here are the full log messages of a suspend to RAM and resume cycle with
>> Kernel 4.7.8:
>>
>>> [   22.605418] PM: Syncing filesystems ... done.
>>> [   22.613640] PM: Preparing system for sleep (mem)
>>> [   22.615108] Freezing user space processes ... (elapsed 0.001 seconds) done.
>>> [   22.616930] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
>>> [   22.616956] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>>> [   22.618611] PM: Suspending system (mem)
>>> [   22.618640] Suspending console(s) (use no_console_suspend to debug)
>>> [   22.619773] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>>> [   22.626173] sd 0:0:0:0: [sda] Stopping disk
>>> [   23.670076] PM: suspend of devices complete after 1051.008 msecs
>>> [   23.691058] PM: late suspend of devices complete after 20.971 msecs
>>> [   23.692104] r8169 0000:03:00.0: System wakeup enabled by ACPI
>>> [   23.693087] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>>> [   23.711687] PM: noirq suspend of devices complete after 20.624 msecs
>>> [   23.711726] ACPI: Preparing to enter system sleep state S3
>>> [   23.712295] ACPI : EC: EC stopped
>>> [   23.712297] PM: Saving platform NVS memory
>>> [   23.712306] Disabling non-boot CPUs ...
>>> [   23.712590] Cannot set affinity for irq 191
>>> [   23.713647] smpboot: CPU 1 is now offline
>>> [   23.752643] smpboot: CPU 2 is now offline
>>> [   23.802930] smpboot: CPU 3 is now offline
>>> [   23.831827] ACPI: Low-level resume complete
>>> [   23.831938] ACPI : EC: EC started
>>> [   23.831939] PM: Restoring platform NVS memory
>>> [   23.832600] Enabling non-boot CPUs ...
>>> [   23.882819] x86: Booting SMP configuration:
>>> [   23.882821] smpboot: Booting Node 0 Processor 1 APIC 0x2
>>> [   23.885308]  cache: parent cpu1 should not be sleeping
>>> [   23.885757] CPU1 is up
>>> [   23.932612] smpboot: Booting Node 0 Processor 2 APIC 0x4
>>> [   23.935171]  cache: parent cpu2 should not be sleeping
>>> [   23.935674] CPU2 is up
>>> [   23.982749] smpboot: Booting Node 0 Processor 3 APIC 0x6
>>> [   23.985324]  cache: parent cpu3 should not be sleeping
>>> [   23.985840] CPU3 is up
>>> [   23.986370] ACPI: Waking up from system sleep state S3
>>> [   24.012307] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>>> [   24.023417] PM: noirq resume of devices complete after 20.911 msecs
>>> [   25.052523] PM: early resume of devices complete after 1029.024 msecs
>>> [   25.053082] r8169 0000:03:00.0: System wakeup disabled by ACPI
>>> [   25.053124] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
>>> [   25.054222] rtc_cmos 00:04: System wakeup disabled by ACPI
>>> [   25.055645] sd 0:0:0:0: [sda] Starting disk
>>> [   25.075031] r8169 0000:03:00.0 eth0: link down
>>> [   25.374179] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>>> [   25.377616] ata1.00: configured for UDMA/133
>>> [   26.025736] PM: resume of devices complete after 973.238 msecs
>>> [   26.026109] PM: Finishing wakeup.
>>> [   26.026111] Restarting tasks ... done.
>>> [   27.767611] r8169 0000:03:00.0 eth0: link up
>>
>> And this is how it looks with Kernel 4.8.2:
>>
>>> [   46.928231] PM: Syncing filesystems ... done.
>>> [   46.930391] PM: Preparing system for sleep (mem)
>>> [   46.932002] Freezing user space processes ... (elapsed 0.001 seconds) done.
>>> [   46.933721] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
>>> [   46.933749] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>>> [   46.935457] PM: Suspending system (mem)
>>> [   46.935486] Suspending console(s) (use no_console_suspend to debug)
>>> [   46.936492] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>>> [   46.936598] sd 0:0:0:0: [sda] Stopping disk
>>> [   48.026353] PM: suspend of devices complete after 1090.448 msecs
>>> [   48.057844] PM: late suspend of devices complete after 31.480 msecs
>>> [   48.059086] r8169 0000:03:00.0: System wakeup enabled by ACPI
>>> [   48.059240] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>>> [   48.117234] PM: noirq suspend of devices complete after 59.386 msecs
>>> [   48.117269] ACPI: Preparing to enter system sleep state S3
>>> [   48.117836] ACPI : EC: EC stopped
>>> [   48.117837] PM: Saving platform NVS memory
>>> [   48.117846] Disabling non-boot CPUs ...
>>> [   48.118130] Cannot set affinity for irq 191
>>> [   48.119186] smpboot: CPU 1 is now offline
>>> [   48.179126] smpboot: CPU 2 is now offline
>>> [   48.229450] smpboot: CPU 3 is now offline
>>> [   48.278338] ACPI: Low-level resume complete
>>> [   48.278415] ACPI : EC: EC started
>>> [   48.278416] PM: Restoring platform NVS memory
>>> [   48.279036] irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0
>>> [   48.279044] ->handle_irq():  ffffffff8109b613, handle_bad_irq+0x0/0x1e0
>>> [   48.279052] ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview]
>>> [   48.279054] ->action():           (null)
>>> [   48.279055]    IRQ_NOPROBE set
>>> [   48.279057] unexpected IRQ trap at vector 75
>>>
>> [...]
>>>
>>> [   48.659033] irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0
>>> [   48.659037] ->handle_irq():  ffffffff8109b613, handle_bad_irq+0x0/0x1e0
>>> [   48.659041] ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview]
>>> [   48.659042] ->action():           (null)
>>> [   48.659043]    IRQ_NOPROBE set
>>> [   49.698698] PM: early resume of devices complete after 1089.068 msecs
>>> [   49.699601] r8169 0000:03:00.0: System wakeup disabled by ACPI
>>> [   49.699633] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
>>> [   49.708346] sd 0:0:0:0: [sda] Starting disk
>>> [   49.708581] rtc_cmos 00:04: System wakeup disabled by ACPI
>>> [   49.731492] r8169 0000:03:00.0 eth0: link down
>>> [   50.039718] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>>> [   50.041544] ata1.00: configured for UDMA/133
>>> [   50.381833] PM: resume of devices complete after 683.151 msecs
>>> [   50.385539] PM: Finishing wakeup.
>>> [   50.385541] Restarting tasks ... done.
>>
>> Are the messages just informational or is this something serious that
>> should be fixed?
> 
> Basically it means the machine has an interrupt line active an nothing
> is handling it. It is not serious but rather annoying.

Thank you. Good to hear it is not critical. I would ignore the messages,
but it is annoying that almost 4MB of log messages are generated on
every resume after standby. Maybe it is possible to define a limit for
the maximum amount of the same messages?

> I've seen this happening on proto hardware but it was fixed with
> firmware update.

Currently I am using BIOS v1.22. Recently Acer released v1.23. I could
test if the BIOS update solves the problem.

> 
>> If you need more information or if I should test a patch, please let me
>> know.
> 
> Can you send me output of /proc/interrupts and
> /sys/kernel/debug/pinctrl/INT33FF:*/pins.

Of course:

> $ cat /proc/interrupts
>             CPU0       CPU1       CPU2       CPU3
>    0:       1388          0          0          0   IO-APIC    2-edge      timer
>    1:         17          3          4          3   IO-APIC    1-edge      i8042
>    8:          1          0          0          0   IO-APIC    8-edge      rtc0
>    9:         28         23         22         23   IO-APIC    9-fasteoi   acpi
>   12:         76         36         36         36   IO-APIC   12-edge      i8042
>   18:          0          0          0          0   IO-APIC   18-fasteoi   i801_smbus
>   45:         13         17          9         13   IO-APIC   45-fasteoi   mmc0
>   47:          0          0          0          0   IO-APIC   47-fasteoi   mmc1
>  115:       7816       7632       7694       7549   PCI-MSI 311296-edge      ahci[0000:00:13.0]
>  116:      43793      44661      43670      44402   PCI-MSI 1572864-edge      eth0
>  117:      10759          0          0          0  chv-gpio    0
>  191:          0          0          0          0  chv-gpio   50  80860F14:01 cd
>  196:         35         37         40         41   PCI-MSI 1048576-edge      iwlwifi
>  197:      24359      22517      23054      22852   PCI-MSI 327680-edge      xhci_hcd
>  198:     174515     168035     165519     167706   PCI-MSI 32768-edge      i915
>  199:         20         18         18         16   PCI-MSI 442368-edge      snd_hda_intel:card0
>  NMI:          0          0          0          0   Non-maskable interrupts
>  LOC:     409748     405619     425239     440549   Local timer interrupts
>  SPU:          0          0          0          0   Spurious interrupts
>  PMI:          0          0          0          0   Performance monitoring interrupts
>  IWI:          0          0          0          0   IRQ work interrupts
>  RTR:          0          0          0          0   APIC ICR read retries
>  RES:      74598      69435      68734      60007   Rescheduling interrupts
>  CAL:      23842      28885      29873      26859   Function call interrupts
>  TLB:      17407      23763      25060      21008   TLB shootdowns
>  TRM:          0          0          0          0   Thermal event interrupts
>  THR:          0          0          0          0   Threshold APIC interrupts
>  MCE:          0          0          0          0   Machine check exceptions
>  MCP:         45         44         44         44   Machine check polls
>  ERR:          0
>  MIS:          0
>  PIN:          0          0          0          0   Posted-interrupt notification event
>  PIW:          0          0          0          0   Posted-interrupt wakeup event

> $ cat /sys/kernel/debug/pinctrl/INT33FF:*/pin
> registered pins: 24
> pin 0 (PMU_SLP_S3_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 1 (PMU_BATLOW_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 2 (SUS_STAT_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 3 (PMU_SLP_S0IX_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 4 (PMU_AC_PRESENT) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 5 (PMU_PLTRST_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 6 (PMU_SUSCLK) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 7 (PMU_SLP_LAN_B) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 8 (PMU_PWRBTN_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 9 (PMU_SLP_S4_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 10 (PMU_WAKE_B) mode 1 ctrl0 0x00c10001 ctrl1 0x04c00000
> pin 11 (PMU_WAKE_LAN_B) GPIO ctrl0 0x00018300 ctrl1 0x04c00000
> pin 15 (MF_ISH_GPIO_3) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 16 (MF_ISH_GPIO_7) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 17 (MF_ISH_I2C1_SCL) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 18 (MF_ISH_GPIO_1) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 19 (MF_ISH_GPIO_5) GPIO ctrl0 0x10008201 ctrl1 0x04c00004
> pin 20 (MF_ISH_GPIO_9) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 21 (MF_ISH_GPIO_0) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 22 (MF_ISH_GPIO_4) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 23 (MF_ISH_GPIO_8) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 24 (MF_ISH_GPIO_2) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 25 (MF_ISH_GPIO_6) GPIO ctrl0 0x00008201 ctrl1 0x04c00002
> pin 26 (MF_ISH_I2C1_SDA) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> registered pins: 55
> pin 0 (MF_PLT_CLK0) GPIO ctrl0 0x00008200 ctrl1 0x04c00000
> pin 1 (PWM1) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 2 (MF_PLT_CLK1) GPIO ctrl0 0x00008200 ctrl1 0x04c00000
> pin 3 (MF_PLT_CLK4) GPIO ctrl0 0x00008200 ctrl1 0x04c00000
> pin 4 (MF_PLT_CLK3) GPIO ctrl0 0x00008200 ctrl1 0x04c00000
> pin 5 (PWM0) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 6 (MF_PLT_CLK5) GPIO ctrl0 0x00008200 ctrl1 0x04c00000
> pin 7 (MF_PLT_CLK2) GPIO ctrl0 0x00008201 ctrl1 0x04c00000
> pin 15 (SDMMC2_D3_CD_B) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 16 (SDMMC1_CLK) mode 1 ctrl0 0x00110080 ctrl1 0x04c00000
> pin 17 (SDMMC1_D0) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 18 (SDMMC2_D1) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 19 (SDMMC2_CLK) mode 1 ctrl0 0x00010080 ctrl1 0x04c00000
> pin 20 (SDMMC1_D2) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 21 (SDMMC2_D2) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 22 (SDMMC2_CMD) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 23 (SDMMC1_CMD) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 24 (SDMMC1_D1) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 25 (SDMMC2_D0) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 26 (SDMMC1_D3_CD_B) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 30 (SDMMC3_D1) mode 1 ctrl0 0x00910080 ctrl1 0x04c00000
> pin 31 (SDMMC3_CLK) mode 1 ctrl0 0x00010080 ctrl1 0x04c00000
> pin 32 (SDMMC3_D3) mode 1 ctrl0 0x00910080 ctrl1 0x04c00000
> pin 33 (SDMMC3_D2) mode 1 ctrl0 0x00910080 ctrl1 0x04c00000
> pin 34 (SDMMC3_CMD) mode 1 ctrl0 0x00910080 ctrl1 0x04c00000
> pin 35 (SDMMC3_D0) mode 1 ctrl0 0x00910080 ctrl1 0x04c00000
> pin 45 (MF_LPC_AD2) mode 1 ctrl0 0x00c10001 ctrl1 0x04c00000
> pin 46 (LPC_CLKRUNB) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 47 (MF_LPC_AD0) mode 1 ctrl0 0x00c10001 ctrl1 0x04c00000
> pin 48 (LPC_FRAMEB) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 49 (MF_LPC_CLKOUT1) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 50 (MF_LPC_AD3) mode 1 ctrl0 0x00c10001 ctrl1 0x04c00000
> pin 51 (MF_LPC_CLKOUT0) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 52 (MF_LPC_AD1) mode 1 ctrl0 0x00c10001 ctrl1 0x04c00000
> pin 60 (SPI1_MISO) mode 1 ctrl0 0x00910301 ctrl1 0x05c00000
> pin 61 (SPI1_CSO_B) GPIO ctrl0 0x00018100 ctrl1 0x04c00000
> pin 62 (SPI1_CLK) GPIO ctrl0 0x00018100 ctrl1 0x04c00000
> pin 63 (MMC1_D6) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 64 (SPI1_MOSI) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 65 (MMC1_D5) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 66 (SPI1_CS1_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 67 (MMC1_D4_SD_WE) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 68 (MMC1_D7) mode 1 ctrl0 0x00910081 ctrl1 0x04c00000
> pin 69 (MMC1_RCLK) mode 1 ctrl0 0x00010081 ctrl1 0x04c00000
> pin 75 (USB_OC1_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 76 (PMU_RESETBUTTON_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 77 (GPIO_ALERT) GPIO ctrl0 0x00018102 ctrl1 0x04c00000
> pin 78 (SDMMC3_PWR_EN_B) mode 1 ctrl0 0x00110001 ctrl1 0x04c00000
> pin 79 (ILB_SERIRQ) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 80 (USB_OC0_B) mode 1 ctrl0 0x00010001 ctrl1 0x04c00000
> pin 81 (SDMMC3_CD_B) GPIO ctrl0 0x00918201 ctrl1 0x04c00003
> pin 82 (SPKR) mode 1 ctrl0 0x00910300 ctrl1 0x05c00000
> pin 83 (SUSPWRDNACK) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000
> pin 84 (SPARE_PIN) mode 1 ctrl0 0x00110300 ctrl1 0x05c00000
> pin 85 (SDMMC3_1P8_EN) mode 1 ctrl0 0x00010000 ctrl1 0x04c00000

Thanks,
Christian

PS: Sorry for double-posting on the previous post. It was a mistake.