Re: [PATCH v3 1/3] mtd: s3c2410: make ecc mode configurable via platform data
From: Marek Vasut
Date: Fri Oct 21 2016 - 14:52:00 EST
On 10/21/2016 08:27 PM, Krzysztof Kozlowski wrote:
> On Thu, Oct 20, 2016 at 07:42:44PM -0200, Sergio Prado wrote:
>> Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode
>> field in the drivers's platform data structure so it can be selectable
>> via platform data.
>>
>> Also setting this field to NAND_ECC_SOFT in all boards using this
>> driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled.
>>
>> Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx>
>> ---
>> arch/arm/mach-s3c24xx/common-smdk.c | 1 +
>> arch/arm/mach-s3c24xx/mach-anubis.c | 1 +
>> arch/arm/mach-s3c24xx/mach-at2440evb.c | 1 +
>> arch/arm/mach-s3c24xx/mach-bast.c | 1 +
>> arch/arm/mach-s3c24xx/mach-gta02.c | 1 +
>> arch/arm/mach-s3c24xx/mach-jive.c | 1 +
>> arch/arm/mach-s3c24xx/mach-mini2440.c | 1 +
>> arch/arm/mach-s3c24xx/mach-osiris.c | 1 +
>> arch/arm/mach-s3c24xx/mach-qt2410.c | 1 +
>> arch/arm/mach-s3c24xx/mach-rx1950.c | 1 +
>> arch/arm/mach-s3c24xx/mach-rx3715.c | 1 +
>> arch/arm/mach-s3c24xx/mach-vstms.c | 1 +
>> arch/arm/mach-s3c64xx/mach-hmt.c | 1 +
>> arch/arm/mach-s3c64xx/mach-mini6410.c | 1 +
>> arch/arm/mach-s3c64xx/mach-real6410.c | 1 +
>> drivers/mtd/nand/Kconfig | 9 --
>> drivers/mtd/nand/s3c2410.c | 119 +++++++++++++------------
>> include/linux/platform_data/mtd-nand-s3c2410.h | 6 +-
>> 18 files changed, 79 insertions(+), 70 deletions(-)
>>
>
> I acked this twice (v1 and v2)... and still you are ignoring them. I am
> sorry, I am not gonna to ack this third time!
Hi, um, I am kinda new to this mess, what's going on ? You ACKed
previous patches, next revision was submitted, so you need to ACK
the next revision too (due to the changes).
> For v2 I acked also other patches but it it is not there as well...
>
> BR,
> Krzysztof
--
Best regards,
Marek Vasut