[PATCH] mtd: nand: change return type of nand_get_flash_type() to int
From: Masahiro Yamada
Date: Fri Nov 04 2016 - 04:48:35 EST
Since commit d1e1f4e42b5d ("mtd: nand: add support for reading ONFI
parameters from NAND device"), the returned "type" is never used in
nand_scan_ident().
Make nand_get_flash_type() simply return an integer value in order
to avoid unnecessary ERR_PTR/PTR_ERR dance.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
drivers/mtd/nand/nand_base.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e5718e5..d337217 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3975,10 +3975,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
/*
* Get the flash and manufacturer id and lookup if the type is supported.
*/
-static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
- struct nand_chip *chip,
- int *maf_id, int *dev_id,
- struct nand_flash_dev *type)
+static int nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip,
+ int *maf_id, int *dev_id,
+ struct nand_flash_dev *type)
{
int busw;
int i, maf_idx;
@@ -4016,7 +4015,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
*maf_id, *dev_id, id_data[0], id_data[1]);
- return ERR_PTR(-ENODEV);
+ return -ENODEV;
}
if (!type)
@@ -4043,7 +4042,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
}
if (!type->name)
- return ERR_PTR(-ENODEV);
+ return -ENODEV;
if (!mtd->name)
mtd->name = type->name;
@@ -4088,7 +4087,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
pr_warn("bus width %d instead %d bit\n",
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
busw ? 16 : 8);
- return ERR_PTR(-EINVAL);
+ return -EINVAL;
}
nand_decode_bbm_options(mtd, chip, id_data);
@@ -4130,7 +4129,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
- return type;
+ return 0;
}
static const char * const nand_ecc_modes[] = {
@@ -4296,7 +4295,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
{
int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_flash_dev *type;
int ret;
ret = nand_dt_init(chip);
@@ -4319,14 +4317,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, &nand_maf_id,
- &nand_dev_id, table);
-
- if (IS_ERR(type)) {
+ ret = nand_get_flash_type(mtd, chip, &nand_maf_id, &nand_dev_id, table);
+ if (ret) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
pr_warn("No NAND device found\n");
chip->select_chip(mtd, -1);
- return PTR_ERR(type);
+ return ret;
}
ret = nand_init_data_interface(chip);
--
1.9.1