Re: [PATCH] mtd: nand: change return type of nand_get_flash_type() to int
From: Boris Brezillon
Date: Sun Nov 06 2016 - 17:56:26 EST
On Fri, 4 Nov 2016 17:49:08 +0900
Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> wrote:
> Since commit d1e1f4e42b5d ("mtd: nand: add support for reading ONFI
> parameters from NAND device"), the returned "type" is never used in
> nand_scan_ident().
>
> Make nand_get_flash_type() simply return an integer value in order
> to avoid unnecessary ERR_PTR/PTR_ERR dance.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Applied.
Thanks,
Boris
> ---
>
> drivers/mtd/nand/nand_base.c | 24 ++++++++++--------------
> 1 file changed, 10 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index e5718e5..d337217 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -3975,10 +3975,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
> /*
> * Get the flash and manufacturer id and lookup if the type is supported.
> */
> -static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> - struct nand_chip *chip,
> - int *maf_id, int *dev_id,
> - struct nand_flash_dev *type)
> +static int nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip,
> + int *maf_id, int *dev_id,
> + struct nand_flash_dev *type)
> {
> int busw;
> int i, maf_idx;
> @@ -4016,7 +4015,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
> pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
> *maf_id, *dev_id, id_data[0], id_data[1]);
> - return ERR_PTR(-ENODEV);
> + return -ENODEV;
> }
>
> if (!type)
> @@ -4043,7 +4042,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> }
>
> if (!type->name)
> - return ERR_PTR(-ENODEV);
> + return -ENODEV;
>
> if (!mtd->name)
> mtd->name = type->name;
> @@ -4088,7 +4087,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> pr_warn("bus width %d instead %d bit\n",
> (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
> busw ? 16 : 8);
> - return ERR_PTR(-EINVAL);
> + return -EINVAL;
> }
>
> nand_decode_bbm_options(mtd, chip, id_data);
> @@ -4130,7 +4129,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
> (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
> mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
> - return type;
> + return 0;
> }
>
> static const char * const nand_ecc_modes[] = {
> @@ -4296,7 +4295,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
> {
> int i, nand_maf_id, nand_dev_id;
> struct nand_chip *chip = mtd_to_nand(mtd);
> - struct nand_flash_dev *type;
> int ret;
>
> ret = nand_dt_init(chip);
> @@ -4319,14 +4317,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
> nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
>
> /* Read the flash type */
> - type = nand_get_flash_type(mtd, chip, &nand_maf_id,
> - &nand_dev_id, table);
> -
> - if (IS_ERR(type)) {
> + ret = nand_get_flash_type(mtd, chip, &nand_maf_id, &nand_dev_id, table);
> + if (ret) {
> if (!(chip->options & NAND_SCAN_SILENT_NODEV))
> pr_warn("No NAND device found\n");
> chip->select_chip(mtd, -1);
> - return PTR_ERR(type);
> + return ret;
> }
>
> ret = nand_init_data_interface(chip);