Re: [PATCH V4 7/8] thermal: da9062/61: Thermal junction temperature monitoring driver

[Lukasz Luba]

On 14/11/16 08:22, Steve Twiss wrote:
> From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
>
> Add junction temperature monitoring supervisor device driver, compatible
> with the DA9062 and DA9061 PMICs. A MODULE_DEVICE_TABLE() macro is added.
>
> If the PMIC's internal junction temperature rises above TEMP_WARN (125
> degC) an interrupt is issued. This TEMP_WARN level is defined as the
> THERMAL_TRIP_HOT trip-wire inside the device driver.
>
> The thermal triggering mechanism is interrupt based and happens when the
> temperature rises above a given threshold level. The component cannot
> return an exact temperature, it only has knowledge if the temperature is
> above or below a given threshold value. A status bit must be polled to
> detect when the temperature falls below that threshold level again. A
> kernel work queue is configured to repeatedly poll and detect when the
> temperature falls below this trip-wire, between 1 and 10 second intervals
> (defaulting at 3 seconds).
>
> This first level of temperature supervision is intended for non-invasive
> temperature control, where the necessary measures for cooling the system
> down are left to the host software.
>
> Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
Looks good to me.

Reviewed-by: Lukasz Luba <lukasz.luba@xxxxxxx>

Regards,
Lukasz