[PATCH v4 07/20] futex: Introduce throughput-optimized (TP) futexes

[Waiman Long]

A new futex implementation called throughput-optimized (TP) futexes
is introduced. The goal of this new futex type is to maximize locking
throughput at the expense of fairness and deterministic latency. Its
throughput is higher than that of the wait-wake futexes especially
on systems with a large number of CPUs and for workloads where the
lock owners are unlikely to sleep.  The downside of this new futex
is the increase in the response time variance.

The new TP futex type is designed to be used for mutex-like exclusive
user space locks. It is not as versatile as the wait-wake futexes which
can be used for other locking primitives like conditional variables,
or read-write locks. So it is not a direct replacement of wait-wake
futexes.

A futex locking microbenchmark was written where separate userspace
mutexes are implemented using wait-wake (WW), PI and TP futexes
respectively. This microbenchmark was intructed to run 10s of
locking operations with a load latency of 5 as the critical section
on a 2-socket 36-core E5-2699 v3 system (HT off).  The system was
running on a 4.10 based kernel.  the results of the benchmark runs
were as follows:

                        WW futex       PI futex      TP futex
                        --------       --------      --------
Total locking ops      43,607,917      303,047      54,812,918
Per-thread avg/sec        121,129          841         152,242
Per-thread min/sec        114,842          841          37,440
Per-thread max/sec        127,201          842         455,677
% Stddev                    0.50%        0.00%           9.89%
lock futex calls       10,262,001      303,041         134,989
unlock futex calls     12,956,025      303,042              21

The TP futexes had better throughput, but they also have larger
variance.

For the TP futexes, the heavy hitters in the perf profile were:

 98.18%   7.25% [kernel.vmlinux] [k] futex_lock
 87.31%  87.31% [kernel.vmlinux] [k] osq_lock
  3.62%   3.62% [kernel.vmlinux] [k] mutex_spin_on_owner

For the WW futexes, the heavy hitters were:

 86.38%  86.38% [kernel.vmlinux] [k] queued_spin_lock_slowpath
 48.39%   2.65% [kernel.vmlinux] [k] futex_wake
 45.13%   3.57% [kernel.vmlinux] [k] futex_wait_setup

By increasing the load latency, the performance discrepancies between
WW and TP futexes actually increases as shown in the table below.

  Load Latency  WW locking ops  TP locking ops  % change
  ------------  --------------  --------------  --------
      5           43,607,917      54,812,918      +26%
     10           32,822,045      45,685,420      +39%
     20           23,841,429      39,439,048      +65%
     30           18,360,775      31,494,788      +72%
     40           15,383,536      27,687,160      +80%
     50           13,290,368      23,096,937      +74%
    100            8,577,763      14,410,909      +68%
  1us sleep          176,450         179,660       +2%

Signed-off-by: Waiman Long <longman@xxxxxxxxxx>
---
 include/uapi/linux/futex.h |   4 +
 kernel/futex.c             | 559 ++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 560 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
index 0b1f716..7f676ac 100644
--- a/include/uapi/linux/futex.h
+++ b/include/uapi/linux/futex.h
@@ -20,6 +20,8 @@
 #define FUTEX_WAKE_BITSET	10
 #define FUTEX_WAIT_REQUEUE_PI	11
 #define FUTEX_CMP_REQUEUE_PI	12
+#define FUTEX_LOCK		13
+#define FUTEX_UNLOCK		14
 
 #define FUTEX_PRIVATE_FLAG	128
 #define FUTEX_CLOCK_REALTIME	256
@@ -39,6 +41,8 @@
 					 FUTEX_PRIVATE_FLAG)
 #define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
 					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PRIVATE	(FUTEX_LOCK | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PRIVATE	(FUTEX_UNLOCK | FUTEX_PRIVATE_FLAG)
 
 /*
  * Support for robust futexes: the kernel cleans up held futexes at
diff --git a/kernel/futex.c b/kernel/futex.c
index 8b9e982..2374cce 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -30,6 +30,9 @@
  *  "The futexes are also cursed."
  *  "But they come in a choice of three flavours!"
  *
+ *  TP-futex support started by Waiman Long
+ *  Copyright (C) 2016 Red Hat, Inc., Waiman Long <longman@xxxxxxxxxx>
+ *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
@@ -193,6 +196,7 @@
 
 enum futex_type {
 	TYPE_PI = 0,
+	TYPE_TP,
 };
 
 /*
@@ -212,11 +216,23 @@ struct futex_state {
 	struct list_head fs_list;
 
 	/*
-	 * The PI object:
+	 * The PI or mutex object:
 	 */
-	struct rt_mutex pi_mutex;
+	union {
+		struct rt_mutex pi_mutex;
+		struct mutex mutex;
+	};
 
+	/*
+	 * For both TP/PI futexes, owner is the task that owns the futex.
+	 *
+	 * For TP futex, mutex_owner is the mutex lock holder that is either
+	 * spinning on the futex owner or is sleeping. The owner field will
+	 * only be set via task_pi_list_add() when the mutex lock holder is
+	 * sleeping.
+	 */
 	struct task_struct *owner;
+	struct task_struct *mutex_owner;	/* For TP futexes only */
 	atomic_t refcount;
 
 	enum futex_type type;
@@ -895,6 +911,7 @@ static int refill_futex_state_cache(void)
 
 	/* pi_mutex gets initialized later */
 	state->owner = NULL;
+	state->mutex_owner = NULL;
 	atomic_set(&state->refcount, 1);
 	state->key = FUTEX_KEY_INIT;
 
@@ -917,7 +934,8 @@ static struct futex_state *alloc_futex_state(void)
  * Drops a reference to the futex state object and frees or caches it
  * when the last reference is gone.
  *
- * Must be called with the hb lock held.
+ * Must be called with the hb lock held or with the fs_lock held for TP
+ * futexes.
  */
 static void put_futex_state(struct futex_state *state)
 {
@@ -934,10 +952,24 @@ static void put_futex_state(struct futex_state *state)
 	if (state->owner) {
 		task_pi_list_del(state, false);
 
+		/*
+		 * For TP futexes, the owner field should have been cleared
+		 * before calling put_futex_state.
+		 */
+		WARN_ON(state->type == TYPE_TP);
+
 		if (state->type == TYPE_PI)
 			rt_mutex_proxy_unlock(&state->pi_mutex, state->owner);
 	}
 
+#ifdef CONFIG_SMP
+	/*
+	 * Dequeue the futex state from the hash bucket for TP futexes.
+	 */
+	if (state->type == TYPE_TP)
+		list_del_init(&state->fs_list);
+#endif
+
 	if (current->pi_state_cache)
 		kfree(state);
 	else {
@@ -947,6 +979,7 @@ static void put_futex_state(struct futex_state *state)
 		 * refcount is at 0 - put it back to 1.
 		 */
 		state->owner = NULL;
+		state->mutex_owner = NULL;
 		atomic_set(&state->refcount, 1);
 		current->pi_state_cache = state;
 	}
@@ -3246,6 +3279,516 @@ void exit_robust_list(struct task_struct *curr)
 				   curr, pip);
 }
 
+#ifdef CONFIG_SMP
+/*
+ * Throughput-Optimized (TP) Futexes
+ * ---------------------------------
+ *
+ * Userspace mutual exclusion locks can be implemented either by using the
+ * wait-wake (WW) futexes or the PI futexes. The WW futexes have much higher
+ * throughput but can't guarantee minimal latency for high priority processes
+ * like the PI futexes. Even then, the overhead of WW futexes in userspace
+ * locking primitives can easily become a performance bottleneck on system
+ * with a large number of cores.
+ *
+ * The throughput-optimized (TP) futex is a new futex implementation that
+ * provides higher throughput than WW futex via the use of following
+ * two techniques:
+ *  1) Optimistic spinning when futex owner is actively running
+ *  2) Lock stealing
+ *
+ * Optimistic spinning isn't present in other futexes. Lock stealing is
+ * possible in WW futexes, but isn't actively encouraged like the
+ * TP futexes. The downside, however, is in the much higher variance of
+ * the response times. Since there is no point in supporting optimistic
+ * spinning on UP system, this new futex type is only available on SMP
+ * system.
+ *
+ * The TP futexes are not as versatile as the WW futexes. The TP futexes
+ * are used primarily for mutex-like exclusive userspace locks.
+ * On the other hand, WW futexes can also used be implement other
+ * synchronization primitives like conditional variables or semaphores.
+ *
+ * The use of TP futexes is very similar to the PI futexes. Locking is done
+ * by atomically transiting the futex from 0 to the task's thread ID.
+ * Unlocking is done by atomically changing the futex from thread ID to 0.
+ * Any failure to do so will require calls to the kernel to do the locking
+ * and unlocking.
+ *
+ * The purpose of this FUTEX_WAITERS bit is to make the unlocker wake up the
+ * serialization mutex owner. Not having the FUTEX_WAITERS bit set doesn't
+ * mean there is no waiter in the kernel.
+ *
+ * Like PI futexes, TP futexes are orthogonal to robust futexes can be
+ * used together.
+ *
+ * Unlike the other futexes, the futex_q structures aren't used. Instead,
+ * they will queue up in the serialization mutex of the futex state container
+ * queued in the hash bucket.
+ */
+
+/**
+ * lookup_futex_state - Looking up the futex state structure.
+ * @hb:		 hash bucket
+ * @key:	 futex key
+ * @search_only: Boolean search only (no allocation) flag
+ *
+ * This function differs from lookup_pi_state() in that it searches the fs_head
+ * in the hash bucket instead of the waiters in the plist. The HB fs_lock must
+ * be held before calling it. If the search_only flag isn't set, a new state
+ * structure will be pushed into the list and returned if there is no matching
+ * key.
+ *
+ * The reference count won't be incremented for search_only call as the
+ * futex state object won't be destroyed while the fs_lock is being held.
+ *
+ * Return: The matching futex state object or a newly allocated one.
+ *	   NULL if not found in search only lookup.
+ */
+static struct futex_state *
+lookup_futex_state(struct futex_hash_bucket *hb, union futex_key *key,
+		   bool search_only)
+{
+	struct futex_state *state;
+
+	list_for_each_entry(state, &hb->fs_head, fs_list)
+		if (match_futex(key, &state->key)) {
+			if (!search_only)
+				atomic_inc(&state->refcount);
+			return state;
+		}
+
+	if (search_only)
+		return NULL;
+
+	/*
+	 * Push a new one into the list and return it.
+	 */
+	state = alloc_futex_state();
+	state->type = TYPE_TP;
+	state->key = *key;
+	list_add(&state->fs_list, &hb->fs_head);
+	WARN_ON(atomic_read(&state->refcount) != 1);
+
+	/*
+	 * Initialize the mutex structure.
+	 */
+	mutex_init(&state->mutex);
+	WARN_ON(!list_empty(&state->list));
+	return state;
+}
+
+/**
+ * put_futex_state_unlocked - fast dropping futex state reference count
+ * @state: the futex state to be dropped
+ *
+ * This function is used to decrement the reference count in the futex state
+ * object while not holding the HB fs_lock. It can fail.
+ *
+ * Return: 1 if successful and 0 if the reference count is going to be
+ *	   decremented to 0 and hence has to be done under lock.
+ */
+static inline int put_futex_state_unlocked(struct futex_state *state)
+{
+	return atomic_add_unless(&state->refcount, -1, 1);
+}
+
+/**
+ * futex_trylock - try to lock the userspace futex word (0 => vpid).
+ * @uaddr  - futex address
+ * @vpid   - PID of current task
+ * @puval  - storage location for current futex value
+ * @waiter - true for top waiter, false otherwise
+ *
+ * The HB fs_lock should NOT be held while calling this function.
+ * The flag bits are ignored in the trylock.
+ *
+ * If waiter is true
+ * then
+ *   don't preserve the flag bits;
+ * else
+ *   preserve the flag bits
+ * endif
+ *
+ * Return: 1 if lock acquired;
+ *	   0 if lock acquisition failed;
+ *	   -EFAULT if an error happened.
+ */
+static inline int futex_trylock(u32 __user *uaddr, const u32 vpid, u32 *puval,
+				const bool waiter)
+{
+	u32 uval, flags = 0;
+
+	if (unlikely(get_futex_value(puval, uaddr)))
+		return -EFAULT;
+
+	uval = *puval;
+
+	if (uval & FUTEX_TID_MASK)
+		return 0;	/* Trylock fails */
+
+	if (!waiter)
+		flags |= (uval & ~FUTEX_TID_MASK);
+
+	if (unlikely(cmpxchg_futex_value(puval, uaddr, uval, vpid|flags)))
+		return -EFAULT;
+
+	return *puval == uval;
+}
+
+/**
+ * futex_trylock_preempt_disabled - futex_trylock with preemption disabled
+ * @uaddr  - futex address
+ * @vpid   - PID of current task
+ * @puval  - storage location for current futex value
+ *
+ * The preempt_disable() has similar effect as pagefault_disable(). As a
+ * result, we will have to disable page fault as well and handle the case
+ * of faulting in the futex word. This function should only be called from
+ * within futex_spin_on_owner().
+ *
+ * Return: 1 if lock acquired;
+ *	   0 if lock acquisition failed;
+ *	   -EFAULT if an error happened.
+ */
+static inline int futex_trylock_preempt_disabled(u32 __user *uaddr,
+						 const u32 vpid, u32 *puval)
+{
+	int ret;
+
+	pagefault_disable();
+	ret = futex_trylock(uaddr, vpid, puval, true);
+	pagefault_enable();
+
+	return ret;
+}
+
+/**
+ * futex_set_waiters_bit - set the FUTEX_WAITERS bit without fs_lock
+ * @uaddr: futex address
+ * @puval: pointer to current futex value
+ *
+ * Return: 0 if successful or < 0 if an error happen.
+ *	   futex value pointed by puval will be set to current value.
+ */
+static inline int futex_set_waiters_bit(u32 __user *uaddr, u32 *puval)
+{
+	u32 curval, uval = *puval;
+
+	while (!(uval & FUTEX_WAITERS)) {
+		/*
+		 * Set the FUTEX_WAITERS bit.
+		 */
+		if (cmpxchg_futex_value_locked(&curval, uaddr, uval,
+					uval | FUTEX_WAITERS))
+			return -EFAULT;
+		if (curval == uval) {
+			*puval = uval | FUTEX_WAITERS;
+			break;
+		}
+		uval = curval;
+	}
+	return 0;
+}
+
+/**
+ * futex_spin_on_owner - Optimistically spin on futex owner
+ * @uaddr: futex address
+ * @vpid:  PID of current task
+ * @state: futex state object
+ *
+ * Spin on the futex word while the futex owner is active. Otherwise, set
+ * the FUTEX_WAITERS bit and go to sleep.
+ *
+ * As we take a reference to the futex owner's task structure, we don't need
+ * to use RCU to ensure that the task structure is valid.
+ *
+ * The function will directly grab the lock if the owner is dying or the pid
+ * is invalid. That should take care of the problem of dead lock owners
+ * unless the pid wraps around and the perceived owner is not the real owner.
+ * To guard against this case, we will have to use the robust futex feature.
+ *
+ * Return: 0 if futex acquired, < 0 if an error happens.
+ */
+static int futex_spin_on_owner(u32 __user *uaddr, const u32 vpid,
+			       struct futex_state *state)
+{
+	int ret;
+	u32 uval;
+	u32 owner_pid = 0;
+	struct task_struct *owner_task = NULL;
+
+	preempt_disable();
+	WRITE_ONCE(state->mutex_owner, current);
+retry:
+	for (;;) {
+		ret = futex_trylock_preempt_disabled(uaddr, vpid, &uval);
+		if (ret)
+			break;
+
+		if ((uval & FUTEX_TID_MASK) != owner_pid) {
+			if (owner_task)
+				put_task_struct(owner_task);
+
+			owner_pid  = uval & FUTEX_TID_MASK;
+			owner_task = futex_find_get_task(owner_pid);
+		}
+
+		if (need_resched()) {
+			__set_current_state(TASK_RUNNING);
+			schedule_preempt_disabled();
+			continue;
+		}
+
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+
+		if (owner_task->on_cpu) {
+			cpu_relax();
+			continue;
+		}
+
+		/*
+		 * If the owner isn't active, we need to go to sleep after
+		 * making sure that the FUTEX_WAITERS bit is set.
+		 */
+		ret = futex_set_waiters_bit(uaddr, &uval);
+		if (ret)
+			break;
+
+		/*
+		 * Do a trylock after setting the task state to make
+		 * sure we won't miss a wakeup.
+		 *
+		 * Futex owner		Mutex owner
+		 * -----------		-----------
+		 * unlock		set state
+		 * MB			MB
+		 * read state		trylock
+		 * wakeup		sleep
+		 */
+		set_current_state(TASK_INTERRUPTIBLE);
+		ret = futex_trylock_preempt_disabled(uaddr, vpid, &uval);
+		if (ret) {
+			__set_current_state(TASK_RUNNING);
+			break;
+		}
+
+		/*
+		 * Don't sleep if the owner has died or the FUTEX_WAITERS bit
+		 * was cleared. The latter case can happen when unlock and
+		 * lock stealing happen in between setting the FUTEX_WAITERS
+		 * and setting state to TASK_INTERRUPTIBLE.
+		 */
+		if (!(uval & FUTEX_OWNER_DIED) && (uval & FUTEX_WAITERS))
+			schedule_preempt_disabled();
+		__set_current_state(TASK_RUNNING);
+	}
+
+	if (ret == -EFAULT) {
+		ret = fault_in_user_writeable(uaddr);
+		if (!ret)
+			goto retry;
+	}
+
+	if (owner_task)
+		put_task_struct(owner_task);
+
+	/*
+	 * Cleanup futex state.
+	 */
+	WRITE_ONCE(state->mutex_owner, NULL);
+
+	preempt_enable();
+	return ret;
+}
+
+/*
+ * Userspace tried a 0 -> TID atomic transition of the futex value
+ * and failed. The kernel side here does the whole locking operation.
+ * The kernel mutex will be used for serialization. Once becoming the
+ * sole mutex lock owner, it will spin on the futex owner's task structure
+ * to see if it is running. It will also spin on the futex word so as to grab
+ * the lock as soon as it is free.
+ *
+ * This function is not inlined so that it can show up separately in perf
+ * profile for performance analysis purpose.
+ *
+ * Return: 0   - lock acquired
+ *	   < 0 - an error happens
+ */
+static noinline int futex_lock(u32 __user *uaddr, unsigned int flags)
+{
+	struct futex_hash_bucket *hb;
+	union futex_key key = FUTEX_KEY_INIT;
+	struct futex_state *state;
+	u32 uval, vpid = task_pid_vnr(current);
+	int ret;
+
+	/*
+	 * Stealing lock and preserve the flag bits.
+	 */
+	ret = futex_trylock(uaddr, vpid, &uval, false);
+	if (ret)
+		goto out;
+
+	/*
+	 * Detect deadlocks.
+	 */
+	if (unlikely(((uval & FUTEX_TID_MASK) == vpid) ||
+			should_fail_futex(true)))
+		return -EDEADLK;
+
+	if (refill_futex_state_cache())
+		return -ENOMEM;
+
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key, VERIFY_WRITE);
+	if (unlikely(ret))
+		goto out;
+
+	hb = hash_futex(&key);
+	spin_lock(&hb->fs_lock);
+
+	/*
+	 * Locate the futex state by looking up the futex state list in the
+	 * hash bucket. If it isn't found, create a new one and put it into
+	 * the list.
+	 */
+	state = lookup_futex_state(hb, &key, false);
+
+	/*
+	 * We don't need to hold the lock after looking up the futex state
+	 * as we have incremented the reference count.
+	 */
+	spin_unlock(&hb->fs_lock);
+
+	if (!state || (state->type != TYPE_TP)) {
+		ret = state ? -EINVAL : -ENOMEM;
+		goto out_put_state_key;
+	}
+
+	/*
+	 * Acquiring the serialization mutex.
+	 *
+	 * If we got a signal or has some other error, we need to abort
+	 * the lock operation and return.
+	 */
+	ret = mutex_lock_interruptible(&state->mutex);
+	if (unlikely(ret))
+		goto out_put_state_key;
+
+	/*
+	 * As the mutex owner, we can now spin on the futex word as well as
+	 * the active-ness of the futex owner.
+	 */
+	ret = futex_spin_on_owner(uaddr, vpid, state);
+
+	mutex_unlock(&state->mutex);
+
+out_put_state_key:
+	if (!put_futex_state_unlocked(state)) {
+		/*
+		 * May need to free the futex state object and so must be
+		 * under the fs_lock.
+		 */
+		spin_lock(&hb->fs_lock);
+		put_futex_state(state);
+		spin_unlock(&hb->fs_lock);
+	}
+	put_futex_key(&key);
+
+out:
+	return (ret < 0) ? ret : 0;
+}
+
+/*
+ * Userspace attempted a TID -> 0 atomic transition, and failed.
+ * This is the in-kernel slowpath: we look up the futex state (if any),
+ * and wakeup the mutex owner.
+ *
+ * Return: 1 if a wakeup is attempt, 0 if no task to wake,
+ *	   or < 0 when an error happens.
+ */
+static int futex_unlock(u32 __user *uaddr, unsigned int flags)
+{
+	u32 uval, vpid = task_pid_vnr(current);
+	union futex_key key = FUTEX_KEY_INIT;
+	struct futex_hash_bucket *hb;
+	struct futex_state *state = NULL;
+	struct task_struct *owner = NULL;
+	int ret;
+	DEFINE_WAKE_Q(wake_q);
+
+	if (get_futex_value(&uval, uaddr))
+		return -EFAULT;
+
+	if ((uval & FUTEX_TID_MASK) != vpid)
+		return -EPERM;
+
+	if (!(uval & FUTEX_WAITERS))
+		return -EINVAL;
+
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key, VERIFY_WRITE);
+	if (ret)
+		return ret;
+
+	hb = hash_futex(&key);
+	spin_lock(&hb->fs_lock);
+
+	/*
+	 * Check the hash bucket only for matching futex state.
+	 */
+	state = lookup_futex_state(hb, &key, true);
+	if (!state || (state->type != TYPE_TP)) {
+		ret = -EINVAL;
+		spin_unlock(&hb->fs_lock);
+		goto out_put_key;
+	}
+
+	owner = READ_ONCE(state->mutex_owner);
+	if (owner)
+		wake_q_add(&wake_q, owner);
+
+	spin_unlock(&hb->fs_lock);
+
+	/*
+	 * Unlock the futex.
+	 * The flag bits are not preserved to encourage more lock stealing.
+	 */
+	for (;;) {
+		u32 old = uval;
+
+		if (cmpxchg_futex_value(&uval, uaddr, old, 0)) {
+			ret = -EFAULT;
+			break;
+		}
+		if (old == uval)
+			break;
+		/*
+		 * The non-flag value of the futex shouldn't change
+		 */
+		if ((uval & FUTEX_TID_MASK) != vpid) {
+			ret = -EINVAL;
+			break;
+		}
+	}
+
+out_put_key:
+	put_futex_key(&key);
+	if (owner) {
+		/*
+		 * No error would have happened if owner defined.
+		 */
+		wake_up_q(&wake_q);
+		return 1;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_SMP */
+
 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 		u32 __user *uaddr2, u32 val2, u32 val3)
 {
@@ -3268,6 +3811,10 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 	case FUTEX_TRYLOCK_PI:
 	case FUTEX_WAIT_REQUEUE_PI:
 	case FUTEX_CMP_REQUEUE_PI:
+#ifdef CONFIG_SMP
+	case FUTEX_LOCK:
+	case FUTEX_UNLOCK:
+#endif
 		if (!futex_cmpxchg_enabled)
 			return -ENOSYS;
 	}
@@ -3299,6 +3846,12 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 					     uaddr2);
 	case FUTEX_CMP_REQUEUE_PI:
 		return futex_requeue(uaddr, flags, uaddr2, val, val2, &val3, 1);
+#ifdef CONFIG_SMP
+	case FUTEX_LOCK:
+		return futex_lock(uaddr, flags);
+	case FUTEX_UNLOCK:
+		return futex_unlock(uaddr, flags);
+#endif
 	}
 	return -ENOSYS;
 }
-- 
1.8.3.1