Re: [PATCH 0/3] usb: xhci: Add broken port disable quirk

[Roger Quadros]

Mathias & Felipe,

On 17/11/16 17:01, Roger Quadros wrote:
> Hi,
> 
> Some XHCI controllers e.g. dwc3 based have a broken Port disable [1].
> 
> If the attached high-speed device is misbehaving, the USB stack typically
> disables the port using the PED bit in PORTSC. For the controllers that
> have broken port disable, the port fails to detect further attach/detach
> events and so high-speed devices can no longer be enumerated on the
> port. The workaround is to prevent port disable using PED on such
> controllers.
> 
> We add a new BROKEN_PED quirk flag and 'quirk-broken-port-ped' device
> property and prevent port disable using PED if we encounter the quirk flag.
> 
> [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf
>     Section i896â USB xHCI Port Disable Feature Does Not Work

Any comments on this series?
patch 1 is at v3. Rest 2 are original.

cheers,
-roger

> 
> cheers,
> -roger
> 
> Felipe Balbi (3):
>   usb: xhci: add quirk flag for broken PED bits
>   usb: host: xhci-plat: enable BROKEN_PED quirk if platform requested
>   usb: dwc3: host: pass quirk-broken-port-ped property for known broken
>     revisions
> 
>  Documentation/devicetree/bindings/usb/usb-xhci.txt |  1 +
>  drivers/usb/dwc3/host.c                            | 21 ++++++++++++++++++---
>  drivers/usb/host/xhci-hub.c                        |  6 ++++++
>  drivers/usb/host/xhci-plat.c                       |  3 +++
>  drivers/usb/host/xhci.h                            |  3 +++
>  5 files changed, 31 insertions(+), 3 deletions(-)
>