Re: [PATCH 0/3] usb: xhci: Add broken port disable quirk

[Felipe Balbi]

Hi,

Roger Quadros <rogerq@xxxxxx> writes:
> Mathias & Felipe,
>
> On 17/11/16 17:01, Roger Quadros wrote:
>> Hi,
>> 
>> Some XHCI controllers e.g. dwc3 based have a broken Port disable [1].
>> 
>> If the attached high-speed device is misbehaving, the USB stack typically
>> disables the port using the PED bit in PORTSC. For the controllers that
>> have broken port disable, the port fails to detect further attach/detach
>> events and so high-speed devices can no longer be enumerated on the
>> port. The workaround is to prevent port disable using PED on such
>> controllers.
>> 
>> We add a new BROKEN_PED quirk flag and 'quirk-broken-port-ped' device
>> property and prevent port disable using PED if we encounter the quirk flag.
>> 
>> [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf
>>     Section i896â USB xHCI Port Disable Feature Does Not Work
>
> Any comments on this series?
> patch 1 is at v3. Rest 2 are original.

none from me. Mathias?

-- 
balbi

Attachment: signature.asc
Description: PGP signature