Re: [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)

[Michael Zoran]

On Wed, 2017-02-01 at 13:20 +0100, Gerd Hoffmann wrote:
> > > I think just having links from
> > > arch/arm64/boot/dts/broadcom/bcm2837*.dts* to arch/arm/boot/dts/
> > > would
> > > be the solution, then this Makefile could just reference
> > > bcm2837-rpi-3-b.dtb.
> > 
> > I suspect it is not that easy, last time I tried it didn't work.
> > Will try again though.
> 
> Yep, dtbs_install fails:
> 
> [ ... ]
> Â INSTALL arch/arm/boot/dts/bcm2835-rpi-b-plus.dtb
> Â INSTALL arch/arm/boot/dts/bcm2835-rpi-a-plus.dtb
> Â INSTALL arch/arm/boot/dts/bcm2836-rpi-2-b.dtb
> Â INSTALLÂ
> cp: missing destination file operand after '/boot/dtbs/4.10.0-rc5+'
> Try 'cp --help' for more information.
> /root/linux/scripts/Makefile.dtbinst:41: recipe for target
> 'bcm2837-rpi-3-b.dts' failed
> make[3]: *** [bcm2837-rpi-3-b.dts] Error 1
> arch/arm/Makefile:348: recipe for target 'dtbs_install' failed
> make[2]: *** [dtbs_install] Error 2
> Makefile:150: recipe for target 'sub-make' failed
> make[1]: *** [sub-make] Error 2
> Makefile:24: recipe for target '__sub-make' failed

This is actually a problem I had to deal with way in the begging of
ARM64.  What was done in the github tree was to have the one of the DTS
 files(in this case 64) #include the 32 bit dts.  That way it's not
needed to have the symbolic link and install should work.

I know it's ulgy, but it works...

Take a look at:
https://github.com/raspberrypi/linux/blob/rpi-4.10.y/arch/arm64/boot/dt
s/broadcom/bcm2710-rpi-3-b.dts

Here is what the file contains:
#define RPI364

#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts"