Re: [PATCH RESEND v7 1/2] Add OV5647 device tree documentation

[Sakari Ailus]

Hi Ramiro,

On Fri, Feb 03, 2017 at 06:18:32PM +0000, Ramiro Oliveira wrote:
> Create device tree bindings documentation.
> 
> Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/ov5647.txt       | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> new file mode 100644
> index 000000000000..57fd40036c26
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> @@ -0,0 +1,35 @@
> +Omnivision OV5647 raw image sensor
> +---------------------------------
> +
> +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
> +and CCI (I2C compatible) control bus.
> +
> +Required properties:
> +
> +- compatible		: "ovti,ov5647".
> +- reg			: I2C slave address of the sensor.
> +- clocks		: Reference to the xclk clock.
> +- clock-names		: Should be "xclk".
> +- clock-frequency	: Frequency of the xclk clock.
> +
> +The common video interfaces bindings (see video-interfaces.txt) should be
> +used to specify link to the image data receiver. The OV5647 device
> +node should contain one 'port' child node with an 'endpoint' subnode.
> +
> +Example:
> +
> +	i2c@2000 {
> +		...
> +		ov: camera@36 {
> +			compatible = "ovti,ov5647";
> +			reg = <0x36>;
> +			clocks = <&camera_clk>;
> +			clock-names = "xclk";
> +			clock-frequency = <30000000>;

For what it's worth, the spec documents the supported frequency range as
6--27 MHz. Most units could still work on frequencies slightly off the
range though.

> +			port {
> +				camera_1: endpoint {
> +					remote-endpoint = <&csi1_ep1>;
> +				};
> +			};
> +		};
> +	};

-- 
Regards,

Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx