Re: [PATCH v5 07/39] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround

[Troy Kisky]

On 3/9/2017 8:52 PM, Steve Longerbeam wrote:
> There is a pin conflict with GPIO_6. This pin functions as a power
> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
> workaround for erratum ERR006687, to wake-up the ARM cores on normal
> RX and TX packet done events. So we need to remove the h/w workaround
> to support the OV5642. The result is that the CPUidle driver will no
> longer allow entering the deep idle states on the sabrelite.
> 
> This is a partial revert of
> 
> commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
> 			interrupt.")
> commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
> 			for ERR006687")
> 
> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> index 8413179..89dce27 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> @@ -270,9 +270,6 @@
>  	txd1-skew-ps = <0>;
>  	txd2-skew-ps = <0>;
>  	txd3-skew-ps = <0>;

How about

+#if !IS_ENABLED(CONFIG_VIDEO_OV5642)

> -	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> -			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> -	fsl,err006687-workaround-present;

+#endif

Is that allowed ?


>  	status = "okay";
>  };
>  
> @@ -373,7 +370,6 @@
>  				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
>  				/* Phy reset */
>  				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
> -				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
>  			>;
>  		};
>  
>