Re: [PATCH v5 07/39] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround

[Fabio Estevam]

On Fri, Mar 10, 2017 at 3:59 PM, Troy Kisky
<troy.kisky@xxxxxxxxxxxxxxxxxxx> wrote:
> On 3/9/2017 8:52 PM, Steve Longerbeam wrote:
>> There is a pin conflict with GPIO_6. This pin functions as a power
>> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
>> workaround for erratum ERR006687, to wake-up the ARM cores on normal
>> RX and TX packet done events. So we need to remove the h/w workaround
>> to support the OV5642. The result is that the CPUidle driver will no
>> longer allow entering the deep idle states on the sabrelite.
>>
>> This is a partial revert of
>>
>> commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
>>                       interrupt.")
>> commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
>>                       for ERR006687")
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ----
>>  1 file changed, 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
>> index 8413179..89dce27 100644
>> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
>> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
>> @@ -270,9 +270,6 @@
>>       txd1-skew-ps = <0>;
>>       txd2-skew-ps = <0>;
>>       txd3-skew-ps = <0>;
>
> How about
>
> +#if !IS_ENABLED(CONFIG_VIDEO_OV5642)

Or maybe just create a new device tree for using the camera, like
imx6q-sabrelite-camera.dts.

This way we can keep the FEC erratum for the existing sabrelite dtb's.