Re: [PATCH 1/2] doc: Add bindings document for Xilinx LogiCore PR Decoupler

[Michal Simek]

On 10.3.2017 22:30, Moritz Fischer wrote:
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
> 
> Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
> Cc: Michal Simek <michal.simek@xxxxxxxxxx>
> Cc: SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>  .../bindings/fpga/xilinx-pr-decoupler.txt          | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..b82b928
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,24 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler  manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge.  The controller can also
> +couple /enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +Required properties:
> +- compatible		: Should contain "xlnx,pr-decoupler-1.00"
> +- regs			: base address and size for decoupler module
> +
> +Optional properties:
> +- bridge-enable		: 0 if driver should disable bridge at startup
> +			  1 if driver should enable bridge at startup
> +			  Default is to leave bridge in current state.
> +
> +Example:
> +	fpga-bridge@100000450 {
> +		compatible = "xlnx,pr-decoupler-1.00";
> +		regs = <0x1000 0x10>;
> +		bridge-enable = <0>;
> +	};
> 

Look at.
https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt


And you miss above required clk property. I do use aclk because this is
what it is shown in vivado.

Thanks,
Michal