Re: [PATCH v1 2/4] clk: rockchip: rk3228: add CLK_IGNORE_UNUSED flag for some clks

From: Heiko Stuebner
Date: Wed Mar 22 2017 - 13:24:21 EST

Next message: Leonard Crestez: "[RFC 7/8] cpufreq: imx6q: Initialize LDO bypass"
Previous message: Dietmar Eggemann: "Re: [PATCH] sched/fair: Fix ftq noise bench regression"
In reply to: Elaine Zhang: "[PATCH v1 2/4] clk: rockchip: rk3228: add CLK_IGNORE_UNUSED flag for some clks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Elaine,

in general, I expect some sort of explanation in the commit message on
why clocks need to be always on and cannot be handled from a driver.

Also you can save flags, if you just make leave-clocks critical, which also
is way safer than using clk_ignore_unused - see rk3399.

Some highlights down below

Am Donnerstag, 16. März 2017, 16:44:52 CET schrieb Elaine Zhang:
> set pclk_cpu and hclk_cpu as critical_clocks
>
> Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
> ---
> drivers/clk/rockchip/clk-rk3228.c | 66 ++++++++++++++++++++-------------------
> 1 file changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
> index db6e5a9e6de6..9f82d089084e 100644
> --- a/drivers/clk/rockchip/clk-rk3228.c
> +++ b/drivers/clk/rockchip/clk-rk3228.c
> @@ -262,9 +262,9 @@ enum rk3228_plls {
> RK2928_CLKGATE_CON(6), 2, GFLAGS),
> GATE(0, "pclk_cpu", "pclk_bus_src", 0,
> RK2928_CLKGATE_CON(6), 3, GFLAGS),
> - GATE(0, "pclk_phy_pre", "pclk_bus_src", 0,
> + GATE(0, "pclk_phy_pre", "pclk_bus_src", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(6), 4, GFLAGS),
> - GATE(0, "pclk_ddr_pre", "pclk_bus_src", 0,
> + GATE(0, "pclk_ddr_pre", "pclk_bus_src", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(6), 13, GFLAGS),

both not needed if you make pclk_ddrupctl and friends critical

> /* PD_VIDEO */
> @@ -445,7 +445,7 @@ enum rk3228_plls {
> RK2928_CLKGATE_CON(2), 12, GFLAGS,
> &rk3228_spdif_fracmux),
>
> - GATE(0, "jtag", "ext_jtag", 0,
> + GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(1), 3, GFLAGS),
>
> GATE(0, "sclk_otgphy0", "xin24m", 0,
> @@ -527,24 +527,24 @@ enum rk3228_plls {
>
> /* PD_VOP */
> GATE(0, "aclk_rga", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 0, GFLAGS),
> - GATE(0, "aclk_rga_noc", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 11, GFLAGS),
> + GATE(0, "aclk_rga_noc", "aclk_rga_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 11, GFLAGS),
> GATE(0, "aclk_iep", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 2, GFLAGS),
> - GATE(0, "aclk_iep_noc", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 9, GFLAGS),
> + GATE(0, "aclk_iep_noc", "aclk_iep_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 9, GFLAGS),

please make noc-clocks critical, see rk3399

>
> GATE(ACLK_VOP, "aclk_vop", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 5, GFLAGS),
> - GATE(0, "aclk_vop_noc", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 12, GFLAGS),
> + GATE(0, "aclk_vop_noc", "aclk_vop_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 12, GFLAGS),
>
> GATE(0, "aclk_hdcp", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(14), 10, GFLAGS),
> - GATE(0, "aclk_hdcp_noc", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(13), 10, GFLAGS),
> + GATE(0, "aclk_hdcp_noc", "aclk_hdcp_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 10, GFLAGS),
>
> GATE(0, "hclk_rga", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 1, GFLAGS),
> GATE(0, "hclk_iep", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 3, GFLAGS),
> GATE(HCLK_VOP, "hclk_vop", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 6, GFLAGS),
> - GATE(0, "hclk_vio_ahb_arbi", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 7, GFLAGS),
> - GATE(0, "hclk_vio_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 8, GFLAGS),
> - GATE(0, "hclk_vop_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 13, GFLAGS),
> + GATE(0, "hclk_vio_ahb_arbi", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 7, GFLAGS),
> + GATE(0, "hclk_vio_noc", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 8, GFLAGS),
> + GATE(0, "hclk_vop_noc", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 13, GFLAGS),
> GATE(0, "hclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 7, GFLAGS),
> - GATE(0, "hclk_hdcp_mmu", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 12, GFLAGS),
> + GATE(0, "hclk_hdcp_mmu", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(14), 12, GFLAGS),

I would assume the hdcp-iommu should handle this clock, why does it need
to be always on?

> GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 6, GFLAGS),
> GATE(0, "pclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 8, GFLAGS),
> GATE(0, "pclk_hdcp", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 11, GFLAGS),
> @@ -558,13 +558,13 @@ enum rk3228_plls {
> GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 2, GFLAGS),
> GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 3, GFLAGS),
> GATE(0, "hclk_host0", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 6, GFLAGS),
> - GATE(0, "hclk_host0_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 7, GFLAGS),
> + GATE(0, "hclk_host0_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 7, GFLAGS),
> GATE(0, "hclk_host1", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 8, GFLAGS),
> - GATE(0, "hclk_host1_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 9, GFLAGS),
> + GATE(0, "hclk_host1_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 9, GFLAGS),
> GATE(0, "hclk_host2", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 10, GFLAGS),
> GATE(0, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 12, GFLAGS),
> - GATE(0, "hclk_otg_pmu", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 13, GFLAGS),
> - GATE(0, "hclk_host2_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 14, GFLAGS),
> + GATE(0, "hclk_otg_pmu", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 13, GFLAGS),
> + GATE(0, "hclk_host2_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 14, GFLAGS),

same as noc clocks, make arbiter clocks critical instead

> GATE(0, "hclk_peri_noc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 1, GFLAGS),
>
> GATE(PCLK_GMAC, "pclk_gmac", "pclk_peri", 0, RK2928_CLKGATE_CON(11), 5, GFLAGS),
> @@ -572,15 +572,15 @@ enum rk3228_plls {
>
> /* PD_GPU */
> GATE(0, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
> - GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
> + GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 15, GFLAGS),
>
> /* PD_BUS */
> - GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
> - GATE(0, "aclk_initmem", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
> + GATE(0, "sclk_initmem_mbist", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 1, GFLAGS),
> + GATE(0, "aclk_initmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 0, GFLAGS),
> GATE(ACLK_DMAC, "aclk_dmac_bus", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
> GATE(0, "aclk_bus_noc", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 1, GFLAGS),
>
> - GATE(0, "hclk_rom", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 3, GFLAGS),
> + GATE(0, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 3, GFLAGS),
> GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 7, GFLAGS),
> GATE(HCLK_I2S1_8CH, "hclk_i2s1_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 8, GFLAGS),
> GATE(HCLK_I2S2_2CH, "hclk_i2s2_2ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
> @@ -589,18 +589,18 @@ enum rk3228_plls {
> GATE(0, "hclk_crypto_mst", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
> GATE(0, "hclk_crypto_slv", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 12, GFLAGS),
>
> - GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
> - GATE(0, "pclk_ddrmon", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
> - GATE(0, "pclk_msch_noc", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(10), 2, GFLAGS),
> + GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 4, GFLAGS),
> + GATE(0, "pclk_ddrmon", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 6, GFLAGS),
> + GATE(0, "pclk_msch_noc", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 2, GFLAGS),

again critical

> - GATE(0, "pclk_efuse_1024", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS),
> - GATE(0, "pclk_efuse_256", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 14, GFLAGS),
> + GATE(0, "pclk_efuse_1024", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 13, GFLAGS),
> + GATE(0, "pclk_efuse_256", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 14, GFLAGS),

we do have a general efuse driver, why do these clocks need to be on?

> GATE(PCLK_I2C0, "pclk_i2c0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 15, GFLAGS),
> GATE(PCLK_I2C1, "pclk_i2c1", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 0, GFLAGS),
> GATE(PCLK_I2C2, "pclk_i2c2", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 1, GFLAGS),
> GATE(PCLK_I2C3, "pclk_i2c3", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 2, GFLAGS),
> GATE(PCLK_TIMER, "pclk_timer0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS),
> - GATE(0, "pclk_stimer", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
> + GATE(0, "pclk_stimer", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 5, GFLAGS),
> GATE(PCLK_SPI0, "pclk_spi0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
> GATE(PCLK_PWM, "pclk_rk_pwm", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 7, GFLAGS),
> GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 8, GFLAGS),
> @@ -616,20 +616,20 @@ enum rk3228_plls {
> GATE(0, "pclk_sgrf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 2, GFLAGS),
> GATE(0, "pclk_sim", "pclk_cpu", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS),
>
> - GATE(0, "pclk_ddrphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS),
> - GATE(0, "pclk_acodecphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 5, GFLAGS),
> + GATE(0, "pclk_ddrphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 3, GFLAGS),
> + GATE(0, "pclk_acodecphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 5, GFLAGS),
> GATE(PCLK_HDMI_PHY, "pclk_hdmiphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 7, GFLAGS),
> GATE(0, "pclk_vdacphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
> - GATE(0, "pclk_phy_noc", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 9, GFLAGS),
> + GATE(0, "pclk_phy_noc", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 9, GFLAGS),
>
> GATE(0, "aclk_vpu", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 0, GFLAGS),
> - GATE(0, "aclk_vpu_noc", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 4, GFLAGS),
> + GATE(0, "aclk_vpu_noc", "aclk_vpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 4, GFLAGS),
> GATE(0, "aclk_rkvdec", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 2, GFLAGS),
> - GATE(0, "aclk_rkvdec_noc", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 6, GFLAGS),
> + GATE(0, "aclk_rkvdec_noc", "aclk_rkvdec_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 6, GFLAGS),
> GATE(0, "hclk_vpu", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 1, GFLAGS),
> - GATE(0, "hclk_vpu_noc", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 5, GFLAGS),
> + GATE(0, "hclk_vpu_noc", "hclk_vpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 5, GFLAGS),
> GATE(0, "hclk_rkvdec", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 3, GFLAGS),
> - GATE(0, "hclk_rkvdec_noc", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 7, GFLAGS),
> + GATE(0, "hclk_rkvdec_noc", "hclk_rkvdec_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 7, GFLAGS),
>
> /* PD_MMC */
> MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK3228_SDMMC_CON0, 1),
> @@ -644,6 +644,8 @@ enum rk3228_plls {
>
> static const char *const rk3228_critical_clocks[] __initconst = {
> "aclk_cpu",
> + "pclk_cpu",
> + "hclk_cpu",
> "aclk_peri",
> "hclk_peri",
> "pclk_peri",
>

Heiko

Next message: Leonard Crestez: "[RFC 7/8] cpufreq: imx6q: Initialize LDO bypass"
Previous message: Dietmar Eggemann: "Re: [PATCH] sched/fair: Fix ftq noise bench regression"
In reply to: Elaine Zhang: "[PATCH v1 2/4] clk: rockchip: rk3228: add CLK_IGNORE_UNUSED flag for some clks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]