[PATCH 1/3] mfd: cpcap: Fix interrupt to use level interrupt

[Tony Lindgren]

I made a mistake assuming the device tree configuration for interrupt
triggering was somehow passed to the SPI device but it's not.

In the Motorola Linux kernel tree CPCAP PMIC is configured as a rising
edge triggered interrupt, but then then it's interrupt handler keeps
looping until the GPIO line goes down. So the CPCAP interrupt is clearly
a level interrupt and not an edge interrupt.

Earlier when I tried to configure it as level interrupt using the
device tree, I did not account that the triggering only gets passed
to the SPI core and it also needs to be specified in the CPCAP driver
when we do devm_regmap_add_irq_chip().

Fixes: 56e1d40d3bea ("mfd: cpcap: Add minimal support")
Cc: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Marcel Partap <mpartap@xxxxxxx>
Cc: Michael Scott <michael.scott@xxxxxxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 drivers/mfd/motorola-cpcap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -126,7 +126,7 @@ static int cpcap_init_irq_chip(struct cpcap_ddata *cpcap, int irq_chip,
 
 	ret = devm_regmap_add_irq_chip(&cpcap->spi->dev, cpcap->regmap,
 				       cpcap->spi->irq,
-				       IRQF_TRIGGER_RISING |
+				       irq_get_trigger_type(cpcap->spi->irq) |
 				       IRQF_SHARED, -1,
 				       chip, &cpcap->irqdata[irq_chip]);
 	if (ret) {
-- 
2.12.2