Re: [PATCH 1/3] mfd: cpcap: Fix interrupt to use level interrupt

[Charles Keepax]

On Mon, Apr 03, 2017 at 08:15:54PM -0700, Tony Lindgren wrote:
> I made a mistake assuming the device tree configuration for interrupt
> triggering was somehow passed to the SPI device but it's not.
> 
> In the Motorola Linux kernel tree CPCAP PMIC is configured as a rising
> edge triggered interrupt, but then then it's interrupt handler keeps
> looping until the GPIO line goes down. So the CPCAP interrupt is clearly
> a level interrupt and not an edge interrupt.
> 
> Earlier when I tried to configure it as level interrupt using the
> device tree, I did not account that the triggering only gets passed
> to the SPI core and it also needs to be specified in the CPCAP driver
> when we do devm_regmap_add_irq_chip().
> 
> Fixes: 56e1d40d3bea ("mfd: cpcap: Add minimal support")
> Cc: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Cc: Marcel Partap <mpartap@xxxxxxx>
> Cc: Michael Scott <michael.scott@xxxxxxxxxx>
> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---

Thanks for looking into that further, I thought that might be
what was going on.

Reviewed-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

Thanks,
Charles