Re: [PATCH 2/3] dt-bindings: hwmon: Add bindings for Google Chromium EC HWMON

[Moritz Fischer]

On Fri, Apr 14, 2017 at 5:48 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Apr 13, 2017 at 4:07 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>> On Thu, Apr 13, 2017 at 03:01:40PM -0500, Rob Herring wrote:
>>> On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote:
>>> > From: Moritz Fischer <mdf@xxxxxxxxxx>
>>> >
>>> > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON
>>> > allows monitoring of temperature sensors and fans attached to the
>>> > EC.
>>> >
>>> > Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
>>> > ---
>>> >  .../devicetree/bindings/hwmon/cros-ec-hwmon.txt    | 25 ++++++++++++++++++++++
>>> >  1 file changed, 25 insertions(+)
>>> >  create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
>>> >
>>> > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
>>> > new file mode 100644
>>> > index 0000000..4c94869
>>> > --- /dev/null
>>> > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
>>> > @@ -0,0 +1,25 @@
>>> > +Chromium Embedded Controller EC temperature and fan control
>>> > +-----------------------------------------------------------
>>> > +
>>> > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC
>>> > +firmware attached to the Embedded Controller (EC) and controlled via a host-command
>>> > +interface.
>>> > +
>>> > +An EC HWMON node should be only found as a sub-node of the EC node (see
>>> > +Documentation/devicetree/bindings/mfd/cros-ec.txt).
>>> > +
>>> > +Required properties:
>>> > +- compatible: Must contain "google,cros-ec-hwmon"
>>> > +
>>> > +Example:
>>> > +   embedded-controller@1e {
>>> > +           reg = <0x1e>;
>>> > +           compatible = "google,cros-ec-i2c";
>>> > +           interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>> > +           interrupt-parent = <&gpio0>;
>>> > +
>>> > +           hwmon {
>>> > +                   compatible = "google,cros-ec-hwmon";
>>>
>>> This is sufficient for all devices? I don't see that DT provides
>>> anything here other than instantiating a device, but the parent device
>>> can just as easily do that.
>>>
>> The parent driver (drivers/mfd/cros_ec_i2c.c) calls cros_ec_register(),
>> which uses uses of_platform_populate() to populate all sub-devices.
>> There are various examples in the dts files (look for "google,cros-ec").
>> Does it really make sense to start a second method for instantiating
>> sub-devices ?
>
> Okay, I suppose not. That wasn't clear from the example.

Do you want me to clarify that in the example somehow?

Moritz