Re: [PATCH v6] iio: adc: Add support for TI ADC108S102 and ADC128S102

[Jan Kiszka]

On 2017-05-18 13:07, Andy Shevchenko wrote:
> On Wed, May 17, 2017 at 6:28 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote:
>> This is an upstream port of an IIO driver for the TI ADC108S102 and
>> ADC128S102. The former can be found on the Intel Galileo Gen2 and the
>> Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is
>> included.
>>
>> Due to the lack of regulators under ACPI, we hard-code the voltage
>> provided to the VA pin of the ADC to 5 V, the value used on Galileo and
>> IOT2000. For DT usage, the regulator "vref-supply" provides this
>> information. Note that DT usage has not been tested.
>>
>> Original author: Bogdan Pricop <bogdan.pricop@xxxxxxxxxx>
>> Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel:
>> Todor Minchev <todor@xxxxxxxxxxxxx>.
>>
>> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> 
> It seems you missed my tag.
> 
> FWIW:
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

As the code changed again, I left it out. Thanks for confirming it that
it still applies!

Jan

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux