Re: [PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

From: Enric Balletbo Serra
Date: Sat May 27 2017 - 16:14:13 EST


2017-05-26 23:26 GMT+02:00 Liam Breck <liam@xxxxxxxxxxxxxxxxx>:
> Hi Enric,
>
> On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra
> <enric.balletbo@xxxxxxxxxxxxx> wrote:
>> The TS pin of the TPS56217 connects to the NTC resistor in the battery
>> pack. By default the device is setup to support a 10-kohm but can also
>> be configured to support a 100-kohm. Add a propietry to configure the
>> connected NTC resistor. Therefore, the charger would get the wrong
>> temperature information.
>
> This also needs a monitored-battery property, and a battery node in
> the example. See https://patchwork.kernel.org/patch/9710803/
>

Right I'll add the property in v4.

>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>> ---
>> Changes since v2:
>> - Requested by Sebastian Reichel
>> - Get rid of common properties and only maintain ntc-type.
>> Changes since v1:
>> - None
>>
>> .../devicetree/bindings/power/supply/tps65217_charger.txt | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
>> index a11072c..851f5c7 100644
>> --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
>> +++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
>> @@ -6,6 +6,12 @@ Required Properties:
>> Should be <0> for the USB charger and <1> for the AC adapter.
>> -interrupt-names: Should be "USB" and "AC"
>>
>> +Optional properties:
>> +-ti,ntc-type: set the NTC type for battery temperature measurement. The value
>> + must be 0 or 1, where:
>> + 0 â 100k (curve 1, B = 3960)
>> + 1 â 10k (curve 2, B = 3480) (default)
>> +
>> This node is a subnode of the tps65217 PMIC.
>>
>> Example:
>> @@ -14,4 +20,5 @@ Example:
>> compatible = "ti,tps65217-charger";
>> interrupts = <0>, <1>;
>> interrupt-names = "USB", "AC";
>> + ti,ntc-type = <1>;
>> };
>> --
>> 2.9.3
>>