Re: [PATCH v5 5/8] gpio: gpio-wcove: Use first level PMIC GPIO irq
From: Andy Shevchenko
Date: Sat Jun 03 2017 - 09:01:51 EST
On Thu, Jun 1, 2017 at 1:37 AM,
<sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx> wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
>
> PMIC mfd driver only exports first level irq for GPIO device.
> But currently we are reading the irqs from the second level irq
> chip, So this patch fixes this issue by adding support to use
> first level PMIC GPIO irq.
>
Shouldn't be this squashed to patch 4?
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> drivers/gpio/gpio-wcove.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> Changes since v1:
> * used correct mask for GPIO0 and GPIO1 interrupts
>
> Changes since v2:
> * Rebased on top of latest release.
> * Removed IRQ0 and IRQ1 mask defines.
>
> Changes since v3:
> * None
>
> diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
> index 7b1bc20..bba7704 100644
> --- a/drivers/gpio/gpio-wcove.c
> +++ b/drivers/gpio/gpio-wcove.c
> @@ -401,7 +401,7 @@ static int wcove_gpio_probe(struct platform_device *pdev)
> if (!wg)
> return -ENOMEM;
>
> - wg->regmap_irq_chip = pmic->irq_chip_data_level2;
> + wg->regmap_irq_chip = pmic->irq_chip_data;
>
> platform_set_drvdata(pdev, wg);
>
> @@ -449,6 +449,18 @@ static int wcove_gpio_probe(struct platform_device *pdev)
>
> gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
>
> + /* Enable GPIO0 interrupts */
> + ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
> + 0x00);
> + if (ret)
> + return ret;
> +
> + /* Enable GPIO1 interrupts */
> + ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
> + 0x00);
> + if (ret)
> + return ret;
> +
> return 0;
> }
>
> --
> 2.7.4
>
--
With Best Regards,
Andy Shevchenko