Re: [PATCH net] xgene: Don't fail probe, if there is no clk resource for SGMII interfaces
From: Iyappan Subramanian
Date: Fri Jul 28 2017 - 14:40:38 EST
On Fri, Jul 28, 2017 at 7:23 AM, Tom Bogendoerfer
<tsbogend@xxxxxxxxxxxxxxxx> wrote:
> On Thu, Jul 27, 2017 at 03:39:58PM -0700, Laura Abbott wrote:
>> I don't know the intricacies of the Mustang hardware but external
>> aborts have been a symptom of missing clocks on other hardware.
>
> you are right, it's a missing clock. For SGMII ports the driver
> doesn't really use the clock source other then doing the one
> devm_clk_get(), but this is enough to get the clock going.
>
> Below patch fixes the crash and brings back the second SGMII port
> (even without a clock source in device tree, I guess it uses clock
> from first port). From a correctness standpoint there should probably
> be a clk_prepare_enable(), if port is SGMII.
>
> Could you test the patch ? If it works, I'll submit it.
>
> Thomas.
>
> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> index 86058a9f3417..1d307f2def2d 100644
> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> @@ -1785,9 +1785,9 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
>
> xgene_enet_gpiod_get(pdata);
>
> - if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
> - pdata->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdata->clk)) {
> + pdata->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(pdata->clk)) {
> + if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
> /* Abort if the clock is defined but couldn't be
> * retrived. Always abort if the clock is missing on
> * DT system as the driver can't cope with this case.
>
> --
Thanks for the patch.
Acked-by: Iyappan Subramanian <isubramanian@xxxxxxx>
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea. [ RFC1925, 2.3 ]