Re: [PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core

From: Rob Herring
Date: Thu Aug 10 2017 - 16:35:12 EST


On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
> From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
>
> Device Tree bindinds for Altera ASMI Parallel II IP Core.

s/bindinds/bindings/

>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/mtd/altera-asmip2.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> new file mode 100644
> index 0000000..3380366
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> @@ -0,0 +1,22 @@
> +* Altera ASMI Parallel II IP Core
> +
> +Required properties:
> +- compatible : Should be "altr,asmi_parallel2".

s/_/-/

> +- reg : A tuple consisting of a physical address and length.
> +
> +Optional subnodes:
> +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.

But this is not a general purpose SPI controller?

> +- reg : chip select value
> +- label : optional user friendly label
> +
> +Example:
> +
> +qspi: spi@a0001000 {
> + compatible = "altr,asmi_parallel2";
> + reg = <0xa0001000 0x10>;
> +
> + flash@0 {

This should have a compatible.

> + reg = <0>;
> + label = "FPGA Image";
> + };
> +};
> --
> 2.7.4
>