Re: [PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core

From: matthew . gerlach
Date: Mon Aug 14 2017 - 12:38:46 EST



Hi Rob,

Thanks for the feedback. Please see my comments in line.

Matthew Gerlach

On Thu, 10 Aug 2017, Rob Herring wrote:

On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>

Device Tree bindinds for Altera ASMI Parallel II IP Core.

s/bindinds/bindings/


Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/mtd/altera-asmip2.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt

diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
new file mode 100644
index 0000000..3380366
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
@@ -0,0 +1,22 @@
+* Altera ASMI Parallel II IP Core
+
+Required properties:
+- compatible : Should be "altr,asmi_parallel2".

s/_/-/

+- reg : A tuple consisting of a physical address and length.
+
+Optional subnodes:
+Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.

But this is not a general purpose SPI controller?


The component is a general pupose SPI controller, but this driver
expects a spi-nor device to be connected to it. As such I wonder if the
compatible string should be "altr,asmi-parallel2-spi-nor".



+- reg : chip select value
+- label : optional user friendly label
+
+Example:
+
+qspi: spi@a0001000 {
+ compatible = "altr,asmi_parallel2";
+ reg = <0xa0001000 0x10>;
+
+ flash@0 {

This should have a compatible.

+ reg = <0>;
+ label = "FPGA Image";
+ };

Since I have no way to test multiple flash chips, it might
be simpler to not specify any subnodes.

+};
--
2.7.4