[PATCH v3 3/5] reset: stm32: use the reset-simple driver
From: Philipp Zabel
Date: Wed Aug 16 2017 - 05:47:31 EST
The reset-simple driver can be used without changes.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
drivers/reset/Kconfig | 11 ++---
drivers/reset/Makefile | 1 -
drivers/reset/reset-simple.c | 1 +
drivers/reset/reset-stm32.c | 108 -------------------------------------------
4 files changed, 4 insertions(+), 117 deletions(-)
delete mode 100644 drivers/reset/reset-stm32.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 78a8f6057985b..29f4487c290fc 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -70,19 +70,14 @@ config RESET_PISTACHIO
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_SOCFPGA || ARCH_SUNXI
+ default ARCH_SOCFPGA || ARCH_STM32 || ARCH_SUNXI
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
exclusive register space.
- Currently this driver supports Altera SoCFPGAs and Allwinner SoCs.
-
-config RESET_STM32
- bool "STM32 Reset Driver" if COMPILE_TEST
- default ARCH_STM32
- help
- This enables the RCC reset controller driver for STM32 MCUs.
+ Currently this driver supports Altera SoCFPGAs, the RCC reset
+ controller in STM32 MCUs, and Allwinner SoCs.
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 25f5f722dec01..e8c3a032f4780 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
-obj-$(CONFIG_RESET_STM32) += reset-stm32.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 84b08ce4def01..e54a29b8b532d 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -120,6 +120,7 @@ static const struct reset_simple_devdata reset_simple_active_low = {
static const struct of_device_id reset_simple_dt_ids[] = {
{ .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
+ { .compatible = "st,stm32-rcc", },
{ .compatible = "allwinner,sun6i-a31-clock-reset",
.data = &reset_simple_active_low },
{ /* sentinel */ },
diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
deleted file mode 100644
index 3a7c8527e66af..0000000000000
--- a/drivers/reset/reset-stm32.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) Maxime Coquelin 2015
- * Author: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
- * License terms: GNU General Public License (GPL), version 2
- *
- * Heavily based on sunxi driver from Maxime Ripard.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-struct stm32_reset_data {
- spinlock_t lock;
- void __iomem *membase;
- struct reset_controller_dev rcdev;
-};
-
-static int stm32_reset_assert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct stm32_reset_data *data = container_of(rcdev,
- struct stm32_reset_data,
- rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&data->lock, flags);
-
- reg = readl(data->membase + (bank * 4));
- writel(reg | BIT(offset), data->membase + (bank * 4));
-
- spin_unlock_irqrestore(&data->lock, flags);
-
- return 0;
-}
-
-static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct stm32_reset_data *data = container_of(rcdev,
- struct stm32_reset_data,
- rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&data->lock, flags);
-
- reg = readl(data->membase + (bank * 4));
- writel(reg & ~BIT(offset), data->membase + (bank * 4));
-
- spin_unlock_irqrestore(&data->lock, flags);
-
- return 0;
-}
-
-static const struct reset_control_ops stm32_reset_ops = {
- .assert = stm32_reset_assert,
- .deassert = stm32_reset_deassert,
-};
-
-static const struct of_device_id stm32_reset_dt_ids[] = {
- { .compatible = "st,stm32-rcc", },
- { /* sentinel */ },
-};
-
-static int stm32_reset_probe(struct platform_device *pdev)
-{
- struct stm32_reset_data *data;
- struct resource *res;
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data->membase = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(data->membase))
- return PTR_ERR(data->membase);
-
- spin_lock_init(&data->lock);
-
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = resource_size(res) * 8;
- data->rcdev.ops = &stm32_reset_ops;
- data->rcdev.of_node = pdev->dev.of_node;
-
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
-
-static struct platform_driver stm32_reset_driver = {
- .probe = stm32_reset_probe,
- .driver = {
- .name = "stm32-rcc-reset",
- .of_match_table = stm32_reset_dt_ids,
- },
-};
-builtin_platform_driver(stm32_reset_driver);
--
2.11.0