[PATCH 2/2] iio: ad7793: Fix the serial interface reset

[Dragos Bogdan]

The serial interface can be reset by writing 32 consecutive 1s to the device.
'ret' was initialized correctly but its value was overwritten when
ad7793_check_platform_data() was called. Since a dedicated reset function
is present now, it should be used instead.

Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799")
Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
---
 drivers/iio/adc/ad7793.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index e6706a09e100..47c3d7f32900 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -257,7 +257,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
 	unsigned int vref_mv)
 {
 	struct ad7793_state *st = iio_priv(indio_dev);
-	int i, ret = -1;
+	int i, ret;
 	unsigned long long scale_uv;
 	u32 id;
 
@@ -266,7 +266,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
 		return ret;
 
 	/* reset the serial interface */
-	ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
+	ret = ad_sd_reset(&st->sd, 32);
 	if (ret < 0)
 		goto out;
 	usleep_range(500, 2000); /* Wait for at least 500us */
-- 
2.11.0