Re: [PATCH 2/2] iio: ad7793: Fix the serial interface reset

[Lars-Peter Clausen]

On 09/05/2017 02:16 PM, Dragos Bogdan wrote:
> The serial interface can be reset by writing 32 consecutive 1s to the device.
> 'ret' was initialized correctly but its value was overwritten when
> ad7793_check_platform_data() was called. Since a dedicated reset function
> is present now, it should be used instead.
> 
> Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799")
> Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>

Acked-by: Lars-Peter Clausen <lars@xxxxxxxxxx>

> ---
>  drivers/iio/adc/ad7793.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
> index e6706a09e100..47c3d7f32900 100644
> --- a/drivers/iio/adc/ad7793.c
> +++ b/drivers/iio/adc/ad7793.c
> @@ -257,7 +257,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
>  	unsigned int vref_mv)
>  {
>  	struct ad7793_state *st = iio_priv(indio_dev);
> -	int i, ret = -1;
> +	int i, ret;
>  	unsigned long long scale_uv;
>  	u32 id;
>  
> @@ -266,7 +266,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
>  		return ret;
>  
>  	/* reset the serial interface */
> -	ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
> +	ret = ad_sd_reset(&st->sd, 32);
>  	if (ret < 0)
>  		goto out;
>  	usleep_range(500, 2000); /* Wait for at least 500us */
>