Re: [PATCH] sound: soc: fsl: Do not set DAI sysclk when it is equal to system freq

[Nicolin Chen]

On Wed, Sep 06, 2017 at 08:35:50PM +0200, Åukasz Majewski wrote:
 
> 	clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
> 		 <&clks IMX6QDL_CLK_SSI2>;
> 	clock-names = "ipg", "baud";

> >>  			dailink_master: cpu {
> >>  			    sound-dai = <&ssi2>;
> >>			    clock = <&SSSS>;
> 
> 	If possible I do prefer a solution, which uses only DTS.
> Side question - how to refer to baud clock from [1]?

Just add a property to this cpu node like:
	clock = <&clks IMX6QDL_CLK_SSI2>;

> >>			    system-clock-frequency = <XXXX>;

This would not be necessary unless you want to specify a clock rate
so as to override the clock rate configuration in hw_params().

> >This is the right solution based on current simple-card driver. For
> >SSI (having two clocks), you have to specify the baud clock in the
> >cpu node like that. I believe this is what the simple-card designer
> >expected users to do since the cpu node is the first place that the
> >driver tries to look at.
> 
> I will give a shoot the option with adding the ipg clock.

No, not ipg clock. You should use the second clock -- baud clock.