Re: [PATCH] hwmon: pmbus: Make reg check and clear faults functions return errors

[Andrew Jeffery]

On Thu, 2017-09-07 at 06:40 -0700, Guenter Roeck wrote:
> On 09/06/2017 04:32 PM, Andrew Jeffery wrote:
> 
> > > ÂÂ
> > > Guess I need to dig up my eval board and see if I can reproduce the problem.
> > > Seems you are saying that the problem is always seen when issuing a sequence
> > > of "clear faults" commands on multiple pages ?
> > 
> > Yeah. We're also seeing bad behaviour under other command sequences as well,
> > which lead to this hack of a work-around patch[1].
> > 
> > I'd be very interested in the results of testing against the eval board. I
> > don't have access to one and it seems Maxim have discontinued them.
> > 
> 
> Do you have a somewhat reliable means to reproduce the problem ?

It seems we hit a bunch of problems by just continually
binding/unbinding the driver, if you don't apply that hacky oneshot
retry patch. We canÂhit problems (in our design?) with something like:

# cd /sys/bus/i2c/drivers/max31785; \
	echo $addr > unbind; \
	while echo $addr > bind; \
	do echo $addr > unbind; echo -n .; done;

It should hit issues covered by this patch, as the register checks are
used in the operations used by probe.

Andrew

Attachment: signature.asc
Description: This is a digitally signed message part