[PATCH] thermal/drivers/generic-iio-adc: Switch tz request to devm version

From: Daniel Lezcano
Date: Thu Sep 07 2017 - 14:18:44 EST


Everything mentionned here:
https://lkml.org/lkml/2016/4/20/850

This driver was added before the devm_iio_channel_get() function version was
merged. The sensor should be released before the iio channel, thus we had to
use the non-devm version of thermal_zone_of_sensor_register().

Now the devm_iio_channel_get() is available, do the corresponding change in
this driver.

[Compiled tested only]

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/thermal/thermal-generic-adc.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index 73f55d6..71d0365 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -126,28 +126,23 @@ static int gadc_thermal_probe(struct platform_device *pdev)
gti->dev = &pdev->dev;
platform_set_drvdata(pdev, gti);

- gti->channel = iio_channel_get(&pdev->dev, "sensor-channel");
+ gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
if (IS_ERR(gti->channel)) {
ret = PTR_ERR(gti->channel);
dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
return ret;
}

- gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0,
- gti, &gadc_thermal_ops);
+ gti->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, gti,
+ &gadc_thermal_ops);
if (IS_ERR(gti->tz_dev)) {
ret = PTR_ERR(gti->tz_dev);
dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n",
ret);
- goto sensor_fail;
+ return ret;
}

return 0;
-
-sensor_fail:
- iio_channel_release(gti->channel);
-
- return ret;
}

static int gadc_thermal_remove(struct platform_device *pdev)
--
2.7.4