Re: [PATCH resend v2] power: supply: bq27xxx: enable writing capacity values for bq27421

[H. Nikolaus Schaller]

Hi Liam,
I finally continues testing on OpenPandora.

> Am 31.08.2017 um 22:19 schrieb Liam Breck <liam@xxxxxxxxxxxxxxxxx>:
> 
> Hi,
> 
> This may be a fix that allows >0 input from DT, but won't try to
> program the register since the first 3 fields aren't compatible:
> 
> ... bq27500_dm_regs[] = {
> ...
>  [bq27xxx_dm_design_energy] = {  0,  0, 0,    0, 65535 }, /* missing on chip */
> NB: align columns with other rows

I have tried with this DT

	bat: battery {
		compatible = "simple-battery", "openpandora-battery";
		voltage-min-design-microvolt = <3250000>;
		energy-full-design-microwatt-hours = <14800000>;
		charge-full-design-microamp-hours = <4100000>;
	};

and here is the result:

> root@letux:~# dmesg|fgrep bq27
> [   10.391235] bq27xxx_battery_setup
> [   10.391265] bq27xxx_battery_setup: dm_regs=bf0520e0
> [   10.393798] (NULL device *): hwmon: 'bq27500-1-0' is not a valid name attribute, please fix
> [   10.432678] bq27xxx_battery_settings
> [   10.432952] bq27xxx_battery_set_config
> [   10.432952] bq27xxx_battery_unseal
> [   10.485168] bq27xxx_battery_update_dm_block
> [   10.485198] bq27xxx-battery 2-0055: update design-capacity to 4100

looks good

> [   10.485229] bq27xxx_battery_update_dm_block
> [   10.485229] bq27xxx-battery 2-0055: buffer does not match design-energy dm spec

ok, ignored

> [   10.511718] bq27xxx_battery_update_dm_block
> [   10.511749] bq27xxx-battery 2-0055: update terminate-voltage to 3250

looks good

> [   10.826446] bq27xxx_battery_seal
> [   12.150939] bq27xxx_battery_platform_probe
> [   12.151031] bq27xxx_battery_setup
> [   12.151062] bq27xxx_battery_setup: dm_regs=  (null)
> [   12.153411] (NULL device *): hwmon: 'bq27000-battery' is not a valid name attribute, please fix
> [   12.154327] bq27xxx_battery_settings
> [   12.154357] power_supply bq27000-battery: power_supply_get_battery_info currently only supports devicetree
> [   12.154388] bq27xxx_battery_settings: power_supply_get_battery_info failed ret=-6

... login:

> root@letux:~# cat /sys/class/power_supply/bq27500-1-0/uevent 
> POWER_SUPPLY_NAME=bq27500-1-0
> POWER_SUPPLY_STATUS=Discharging
> POWER_SUPPLY_PRESENT=1
> POWER_SUPPLY_VOLTAGE_NOW=3892000
> POWER_SUPPLY_CURRENT_NOW=-317000
> POWER_SUPPLY_CAPACITY=0

oops.

> POWER_SUPPLY_CAPACITY_LEVEL=Low
> POWER_SUPPLY_TEMP=223
> POWER_SUPPLY_TIME_TO_EMPTY_NOW=0
> POWER_SUPPLY_TECHNOLOGY=Li-ion
> POWER_SUPPLY_CHARGE_FULL=1147000
> POWER_SUPPLY_CHARGE_NOW=2665000
> POWER_SUPPLY_CHARGE_FULL_DESIGN=4100000
> POWER_SUPPLY_CYCLE_COUNT=6
> POWER_SUPPLY_ENERGY_NOW=0
> POWER_SUPPLY_POWER_AVG=64395
> POWER_SUPPLY_HEALTH=Dead

oops. But maybe the bq27500 needs a full cycle first

> POWER_SUPPLY_MANUFACTURER=Texas Instruments

vvv after plugging in charger

> root@letux:~# cat /sys/class/power_supply/bq27500-1-0/uevent 
> POWER_SUPPLY_NAME=bq27500-1-0
> POWER_SUPPLY_STATUS=Charging
> POWER_SUPPLY_PRESENT=1
> POWER_SUPPLY_VOLTAGE_NOW=3923000
> POWER_SUPPLY_CURRENT_NOW=204000
> POWER_SUPPLY_CAPACITY=0
> POWER_SUPPLY_CAPACITY_LEVEL=Low
> POWER_SUPPLY_TEMP=249
> POWER_SUPPLY_TIME_TO_EMPTY_NOW=0
> POWER_SUPPLY_TECHNOLOGY=Li-ion
> POWER_SUPPLY_CHARGE_FULL=1147000
> POWER_SUPPLY_CHARGE_NOW=2665000
> POWER_SUPPLY_CHARGE_FULL_DESIGN=4100000
> POWER_SUPPLY_CYCLE_COUNT=6
> POWER_SUPPLY_ENERGY_NOW=0
> POWER_SUPPLY_POWER_AVG=800
> POWER_SUPPLY_HEALTH=Dead
> POWER_SUPPLY_MANUFACTURER=Texas Instruments
> root@letux:~# 

Now a reboot after removing charger and battery for several minutes:

> root@letux:~# dmesg|fgrep bq27
> [   10.482818] bq27xxx_battery_setup
> [   12.179687] bq27xxx_battery_platform_probe
> [   12.179779] bq27xxx_battery_setup
> [   12.179809] bq27xxx_battery_setup: dm_regs=  (null)
> [   12.182495] (NULL device *): hwmon: 'bq27000-battery' is not a valid name attribute, please fix
> [   12.183502] bq27xxx_battery_settings
> [   12.183532] power_supply bq27000-battery: power_supply_get_battery_info currently only supports devicetree
> [   12.183563] bq27xxx_battery_settings: power_supply_get_battery_info failed ret=-6
> [   15.145812] bq27xxx_battery_setup: dm_regs=bf0520e0
> [   15.152618] (NULL device *): hwmon: 'bq27500-1-0' is not a valid name attribute, please fix
> [   15.346557] bq27xxx_battery_settings
> [   15.350585] bq27xxx_battery_set_config
> [   15.354553] bq27xxx_battery_unseal
> [   15.576538] bq27xxx_battery_update_dm_block
> [   15.580993] bq27xxx-battery 2-0055: design-capacity has 4100

^^^ ok, no change needed

> [   15.676818] bq27xxx_battery_update_dm_block
> [   15.681243] bq27xxx-battery 2-0055: buffer does not match design-energy dm spec
> [   15.798675] bq27xxx_battery_update_dm_block
> [   15.803100] bq27xxx-battery 2-0055: update terminate-voltage to 3250

^^^ looks as if this is not stored in NVM. Should it be?

BTW: it would be nice if all "update" messages could tell the old value as well.

> [   16.011169] bq27xxx_battery_seal
> root@letux:~# cat /sys/class/power_supply/bq27500-1-0/uevent 
> POWER_SUPPLY_NAME=bq27500-1-0
> POWER_SUPPLY_STATUS=Discharging
> POWER_SUPPLY_PRESENT=1
> POWER_SUPPLY_VOLTAGE_NOW=3894000
> POWER_SUPPLY_CURRENT_NOW=-291000
> POWER_SUPPLY_CAPACITY=71

^^^ looks as if the bq27500 did recover from reprogramming

> POWER_SUPPLY_CAPACITY_LEVEL=Normal
> POWER_SUPPLY_TEMP=223
> POWER_SUPPLY_TIME_TO_EMPTY_NOW=31200
> POWER_SUPPLY_TECHNOLOGY=Li-ion
> POWER_SUPPLY_CHARGE_FULL=3748000
> POWER_SUPPLY_CHARGE_NOW=2713000
> POWER_SUPPLY_CHARGE_FULL_DESIGN=4100000
> POWER_SUPPLY_CYCLE_COUNT=6
> POWER_SUPPLY_ENERGY_NOW=9930000
> POWER_SUPPLY_POWER_AVG=64407
> POWER_SUPPLY_HEALTH=Good

^^^ same here

> POWER_SUPPLY_MANUFACTURER=Texas Instruments
> root@letux:~# 


> 
> Pls CC me on patch posts. You left me off your last series.

Sorry, did copy the address list around and dropped off some :(

BR,
Nikolaus