Re: [PATCH 3/6] ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra

[Icenowy Zheng]

ä 2017å10æ10æ GMT+08:00 äå5:04:07, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> åå:
>On Sun, Oct 08, 2017 at 04:29:03AM +0000, Icenowy Zheng wrote:
>> On newer revisions of the Banana Pi M2 Ultra boards, the 5V power
>output
>> (used by HDMI, SATA and USB) is controller via a GPIO.
>> 
>> Add the regulator node for it.
>> 
>> Older revisions just have the 5V power output always on, and the GPIO
>is
>> reserved on these boards. So it won't affect the older revisions.
>> 
>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>> ---
>>  arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> index 7b52608cebe6..035599d870b9 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> @@ -78,6 +78,15 @@
>>  		};
>>  	};
>>  
>> +	reg_vcc5v0: vcc5v0 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vcc5v0";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
>> +		enable-active-high;
>
>This is redundant with the GPIO flag

I remember someone suggested me to add this
property (maybe wens). It's said that the driver may not
process the GPIO_ACTIVE_HIGH correctly.

>
>Maxime