Re: [PATCH 0/2] phy: ti-pipe3: Update PCIe PHY settings

[Bjorn Helgaas]

On Mon, Oct 09, 2017 at 02:33:36PM +0530, Kishon Vijay Abraham I wrote:
> This was supposed to only update ti-pipe3 PHY registers. However because
> of the way the ti-pipe3 PHY, OCP2SCP and PCIe controller are connected
> in dra7xx where
> 
> PCIe controller --------------> ti-pipe3 PHY --------------> OCP2SCP
> 		  depends on		       depends on
> 
> updating ti-pipe3 PHY registers results in an abort.
> 
> Though the dependency between ti-pipe3 PHY and OCP2SCP is created
> (OCP2SCP is parent of ti-pipe3 PHY), and enabling ti-pipe3 PHY clocks
> should in turn enable OCP2SCP (with the help of pm_runtime framework),
> this doesn't work in no_irq stage since pm_runtime is disabled during
> no_irq stage. Since pci-dra7xx enables/initializes ti-pipe3 phy in
> no_irq stage, OCP2SCP is not enabled resulting in an abort with ti-pipe3
> PHY registers are accessed.
> 
> In order to solve this a functional dependency is created between
> PCIe and ti-pipe3 PHY so that PCIe is suspended before PHY/OCP2SCP
> and resumed after PCIe PHY/OCP2SCP
> 
> Kishon Vijay Abraham I (2):
>   PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY

s/PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY/
  PCI: dra7xx: Create functional dependency between PCIe and PHY/

Should these be merged together?  If it makes sense for you to merge them
together, here's my ack for the PCI piece:

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Let me know if you'd like me to take one or both of them.

>   phy: ti-pipe3: Update pcie phy settings
> 
>  drivers/pci/dwc/pci-dra7xx.c  |  16 +++++++
>  drivers/phy/ti/phy-ti-pipe3.c | 101 +++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 116 insertions(+), 1 deletion(-)
> 
> -- 
> 2.11.0
>