Re: [PATCH v2 1/2] extcon: max77843: Add OTG power control to the MUIC driver

[Lee Jones]

On Wed, 18 Oct 2017, Marek Szyprowski wrote:

> Enabling power on VBUS micro-usb pin is required only when passive OTG
> cable is connected. Initially OTG VBUS power control was planned to be
> done in charger driver. However such information is not really available
> from the extcon notifications, so VBUS power control has to be done
> directly in MUIC driver, which has all information about the attached
> accessory.
> 
> For example SmartDock is externally powered accessory, provides OTG
> (USB HOST) functionality and use VBUS pin for charging a device battery,
> so the VBUS charging pump should be disabled in such case.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> ---
>  drivers/extcon/extcon-max77843.c     | 16 ++++++++++++++++

>  include/linux/mfd/max77843-private.h |  3 +++

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog