Re: [PATCH v2 1/2] extcon: max77843: Add OTG power control to the MUIC driver

[Lee Jones]

On Mon, 23 Oct 2017, Lee Jones wrote:

> On Wed, 18 Oct 2017, Marek Szyprowski wrote:
> 
> > Enabling power on VBUS micro-usb pin is required only when passive OTG
> > cable is connected. Initially OTG VBUS power control was planned to be
> > done in charger driver. However such information is not really available
> > from the extcon notifications, so VBUS power control has to be done
> > directly in MUIC driver, which has all information about the attached
> > accessory.
> > 
> > For example SmartDock is externally powered accessory, provides OTG
> > (USB HOST) functionality and use VBUS pin for charging a device battery,
> > so the VBUS charging pump should be disabled in such case.
> > 
> > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> > ---
> >  drivers/extcon/extcon-max77843.c     | 16 ++++++++++++++++
> 
> >  include/linux/mfd/max77843-private.h |  3 +++
> 
> Applied, thanks.

Sorry, wrong key combo:

Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog