Re: [PATCH] usb: dwc2: add optional usb ecc reset bit

[Dinh Nguyen]

Hi John,

was wondering if you have gotten a chance to review this?

Thank,
Dinh

On 11/01/2017 10:34 AM, Dinh Nguyen wrote:
> The dwc2 USB controller in Stratix10 has an additional ECC reset bit that
> needs to get de-asserted in order for the controller to work properly.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> ---
>  drivers/usb/dwc2/core.h     |  1 +
>  drivers/usb/dwc2/platform.c | 10 ++++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 8367d4f9..a4b5f4e 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -920,6 +920,7 @@ struct dwc2_hsotg {
>  	int     irq;
>  	struct clk *clk;
>  	struct reset_control *reset;
> +	struct reset_control *reset_ecc;
>  
>  	unsigned int queuing_high_bandwidth:1;
>  	unsigned int srp_success:1;
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index daf0d37..d466e03 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -220,6 +220,15 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
>  
>  	reset_control_deassert(hsotg->reset);
>  
> +	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
> +	if (IS_ERR(hsotg->reset_ecc)) {
> +		ret = PTR_ERR(hsotg->reset_ecc);
> +		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_deassert(hsotg->reset_ecc);
> +
>  	/* Set default UTMI width */
>  	hsotg->phyif = GUSBCFG_PHYIF16;
>  
> @@ -318,6 +327,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
>  		dwc2_lowlevel_hw_disable(hsotg);
>  
>  	reset_control_assert(hsotg->reset);
> +	reset_control_assert(hsotg->reset_ecc);
>  
>  	return 0;
>  }
>