Re: [RFC PATCH v10 6/7] PCI / PM: Move acpi wakeup code to pci core

[Tony Lindgren]

* Brian Norris <briannorris@xxxxxxxxxxxx> [171207 00:32]:
> On Wed, Dec 06, 2017 at 04:17:54PM -0800, Tony Lindgren wrote:
> > * Brian Norris <briannorris@xxxxxxxxxxxx> [171206 19:36]:
> > > By the way, it seems pretty ambiguous how we want to handle things like
> > > (a) multiple devices sharing the same WAKE#
> > > (b) systems where a slot is swappable
> > > 
> > > For (a), the main problem is that if we have to repeat the interrupt
> > > definition in multiple devices, then we have to deal with something like
> > > IRQF_SHARED. That can be done, but it makes it much harder to use the
> > > dedicated wakeirq helpers.
> > 
> > This will get messy, let's not go there :) That is unless the hardware
> > really has a single interrupt wired to multiple devices. And in that
> > case almost certainly a custom interrupt handler is needed.
> 
> As Rafael mentioned, the spec doesn't clearly delineate a required
> hierarchy to the WAKE# pin, and it's certainly possible to share it. I'm
> fine dodging that question for now, and only writing said custom
> interrupt handler if/when needed.

OK if the WAKE# pin is shared then PCI (or hardware specific?) code needs
to figure out from where it came from.

> But device tree bindings are "forever", so it seems reasonable to at
> least agree how it should be defined.

Well that's why we're just using the existing interrupts-extended
binding there :) It does not leave out the option for shared interrupts,
it's just that drivers/base/power/wakeirq.c can't deal with them in a
sane way or at least we'd have to add a flag to not enable/disable the
wakeirq automatically.

Regards,

Tony