[PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>

We have seen MMC DMA transfers read corrupted data from SDRAM when
a burst interval ends at physical address 0x10000000. To avoid this
problem, we remove the final page of low memory from the memory map.

Signed-off-by: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
---
 arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
 arch/mips/kernel/setup.c |  8 ++++++++
 2 files changed, 32 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index cd89536fbba1..18c57c4bf47e 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -22,6 +22,7 @@
 #include <linux/of_fdt.h>
 
 #include <asm/bootinfo.h>
+#include <asm/page.h>
 #include <asm/prom.h>
 
 #include <asm/mach-jz4740/base.h>
@@ -103,3 +104,26 @@ void __init arch_init_irq(void)
 {
 	irqchip_init();
 }
+
+/*
+ * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
+ * interval ends at physical address 0x10000000. To avoid this problem, we
+ * remove the final page of low memory from the memory map.
+ */
+void __init jz4770_reserve_unsafe_for_dma(void)
+{
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+
+		if (entry->type != BOOT_MEM_RAM)
+			continue;
+
+		if (entry->addr + entry->size != 0x10000000)
+			continue;
+
+		entry->size -= PAGE_SIZE;
+		break;
+	}
+}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 85bc601e9a0d..5a2c20145aee 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_MACH_JZ4770
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770) {
+		extern void __init jz4770_reserve_unsafe_for_dma(void);
+		jz4770_reserve_unsafe_for_dma();
+	}
+#endif
+
 	if (usermem) {
 		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
-- 
2.11.0