[PATCH v3 2/3] clk: tegra20: Correct PLL_C_OUT1 setup

[Dmitry Osipenko]

PLL_C_OUT_1 can't produce 216 MHz defined in the init_table. Let's
set it to 240 MHz and explicitly specify HCLK rate for consistency.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Acked-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
---

Change log:
v2:     No change.
v3:     No change.

 drivers/clk/tegra/clk-tegra20.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index e3392ca2c2fc..dec95919fbff 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1018,9 +1018,9 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 1 },
 	{ TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 1 },
 	{ TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 0 },
-	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 216000000, 0 },
-	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 0, 0 },
-	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 0, 0 },
+	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
+	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 240000000, 0 },
+	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
 	{ TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 0 },
 	{ TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1 },
-- 
2.15.1